.

Industrial Automatic Condensed Milk Processing Line

DescriptionFigure below shows a process line for sweetened condensed milk manufactured from fresh milk. Before evaporation,Website:, the fat and solids-non-fat values of the milk have been standardised to predetermined. The milk has also been heat treated to destroy micro-organisms and enzymes which could cause problems and to stabilise the protein complex. Heat treatment is also important to the development of product viscosity during storage, and is particularly important in the case of sweetened condensed milk. The addition of sugar is a key step in the manufacture of sweetened condensed milk, as the shelf life of the product depends on its osmotic pressure being sufficiently high. A sugar content of at least 62.5% in the aqueous phase is required. Two methods are used for addition of sugar:Addition of dry sugar before heat treatmentAddition of sugar syrup in the evaporatorThe stage at which the sugar is added affects the viscosity of the end product. The evaporator is usually of the multistage falling-film type. When sugar is added in the evaporator, the syrup is drawn into the evaporator and mixed with the milk at the half-way stage of the process. Evaporation then continues until the required dry matter content has been reached. The dry matter content is checked continuously by determining the density of the concentrate.Sweetened condensed milk must be cooled after evaporation. This is the most critical and important stage in the whole process. The water in the condensed milk can only hold half the quantity of lactose in solution. The remaining half will therefore be precipitated in the form of crystals. If the surplus lactose is allowed to precipitate freely, the sugar crystals will be large and the product will be gritty and unsuitable for many applications. It is consequently preferable to control the crystallisation of lactose so that very small crystals are obtained. The required crystallisation is accomplished by cooling the mixture rapidly under vigorous agitation, without air being entrapped. The cooled condensed milk is pumped to a storage tank where it is kept until the following day to allow the crystallisation process to be completed.Sweetened condensed milk should be yellowish in colour and have the appearance of mayonnaise. Traditionally, it is packed in cans, which in this case must be cleaned and sterilised before filling as no sterilisation takes place after canning. Nowadays it is also possible to pack sweetened condensed milk in aseptic paperboard packages. The product is also packed in big barrels, holding about 300kg, for supply to large-scale users.Advantages*  Opportunity to realize products with customized recipes.*  Opportunity to produce more than one product with the same processing line.*  High quality of the final product keeping an elevated nutritional value.*  Wide customization of the final product.*  Maximum yield, minimum production waste.*  Highest energy savings thanks to the most advanced technologies.*  Complete line supervision system through monitoring of every process phase.*  Recording, visualization and printing of all daily production data. FeaturesWorking capacityfrom 5 tons/d up to 100 tons/dProducts- Sweetened condensed milk - Evaporated milk- Condensed milk in varied package:Can, aseptic paperboard packages, big barriers; etc.   


在线联系供应商

至: Shanghai Triowin Automation Machinery Co.,Ltd
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Statec Binder located in Gleisdorf, Australia,has specialized in producing bagging machine for over 35 years.During the development, they have accu...
Details* The robot is suitable for high speed picking and placing the packet goods.* The ISO clamp interface is convenient for using the complex cl...
ParametersModelTUM-5 TUM-10 TUM-20 TUM-50 TUM-100 Working volume(L)5 10 2050100Capacity(kg/h)1~42~108~1510~3050~80Feeding size(mm) ≤5≤8≤10 Crushing...
PrincipleThe high temperature saturated steam has strong penetrability and adsorption, which can heat the a short time to let the microbial cells i...
Features1.Multi-application: Designed to replicate industrial scale processing line. It can be used for teaching all production process, also used ...
供应产品

Same products

KLUBER MICROLUBE GL 261 1KG for SMT Production Line
KLUBER MICROLUBE GL 261 1KG for SMT Production Line 卖方: 广东聚广恒自动化设备有限公司 44 KLUBER ISOFLEXNBU15 1KG/PC 12PC/Carton 45 KLUBER ISOFLEX TOPAS...
Working Clamp Lamp
Working Clamp Lamp 卖方: ZHEJIANG TOPMB ELECTRICAL LIGHTING CO.,LTD TOPMBportable led work light with clamp, free up your desk space while providing you calm, bright...
Ultra Wide Monitor Desk Lamp
Ultra Wide Monitor Desk Lamp 卖方: ZHEJIANG TOPMB ELECTRICAL LIGHTING CO.,LTD TOPMB ultrawide led desk lampcan help you to lighting up your work area when you you have a doubl...
Task Lamp
Task Lamp 卖方: ZHEJIANG TOPMB ELECTRICAL LIGHTING CO.,LTD Magnifier lamp is a really essential tool for anyone who is engaged in precision assembly, inspec...
Read Lamp
Read Lamp 卖方: ZHEJIANG TOPMB ELECTRICAL LIGHTING CO.,LTD A great LED very bright reading lampsplays an important part in any desk work.TOPMB LED Eye Care ...