Full Automatic CZ Purlin Interchangeable Cold Bend Forming Machine Roll Forming Equipment
The profile drawing for Cold Bend Forming Machine The thickness of Material: 1.5-3.0mm Working flow: Uncoiler--Feeding--Leveling--hydraulic punching--Hydraulic cutting--Roll forming--Output table Character of main structure for Cold Bend Forming Machine
a) The structure of the Cold Bend Forming Machine is simple and the appearance of the Cold Bend Forming Machine is beautiful because we adopt the shape-steel structure and most of the connecter is screw which make the machine flexible and stronger.
b) All the components of Cold Bend Forming Machine are from brand-famous enterprise so that they ensure the machine normal function very effectively.
c) We adopt the automatic length-fixed forming and cutting to guarantee the length to be precise and the finished product clear without deforming.
d) Cold Bend Forming Machine is very easy to install the equipment and suitable for producing in the factory.
e) Low noise with high efficiency f) The width of the profile can be automatic adjusted and the last 10 roller stations can be overturned to make C&Z purlin Main Specification of the Cold Bend Forming Machine A. 5T manual decoiler
1) Capacity: 5ton
2）Loading width: MAX 500mm
3）Valid expanding range for coil inner diameter: 480-520mm B. Main roll forming system
1）Main motor power: 15kw
2）Feeding and leveling power: 4KW
3) Hydraulic power:5.5KW
4）Hydraulic pressure: 20Mpa
5）Punching: Hydraulic pre-punching before forming,
6）Punching mould:Cr12mov
7）Cutting: Hydraulic pre-cutting before forming, Auto cutting when reach the set length.
8）Cutting blade: Cr12mov
9）Cutting tolerance: +/- 1.5mm
10）Drive: Chain
11）Roller material: Gcr15 steel and quench treatment hardness 58-62, chrome coated 0.05mm
12）Leveling rollers: 7rollers(three upper and four lower)
13）Roll station: 16groups
14）Raw material: 1.5-3.0mm,pre-galvanized strip steel
15) Valid width after fromed: 100mm-300mm
16) Motor for width adjusting: 4.5KW(1.5KW*3)
17）Working speed: 10m--15m/min(Exclude cutting time)
18）Length Tolerance: ±1.5mm
19）Weight of machine: about 14ton
20）Size of machine: About 11000×1800×1800mm L x W x H
21）Color of machine: depend on customer
22）Coder: Omron
23）Control: PLC Panasonic, made in Japan. 380V 50HZ
24）Computer operating panel: touching screenCertificates Exhibition After sales service:
1).Engineer will give free training lessons to labors in buyer’s factory.
2).The Buyer will buy the round-trip air ticket for Engineer if visa application is approved.
3).The buyer is also responsible to bear expenses generated, e.g. visa formalities, meals, accommodation and allowance of USD80 for engineer per day.
4).During this guarantee period, we will provide spare parts without any charge in case of quality discrepancy caused by us. If the malfunctions are caused by your incorrect operations, we will provide the buyer spare parts at cost price.
5).We will charge the buyer cost price of spare parts beyond one year and provide long-term technical guide.
Other supplier products
|
|
|
Working process for 12 meters long automatic stacker： Transmission rollers---Pneumatic swing arm---Sheet landing----slip rail transmission output ... |
|
|
|
The profile drawing for roof sheet curving machinesCurving Machine Payment terms of the roof sheet curving machines: 30%T/T payment as deposit,Webs... |
|
|
|
The profile drawing of Fire Damper Roll Forming Machine The thickness of Material: 2.0-3.0mm Working flow: Uncoiler—Feeding—Leveling—Punching--r... |
|
|
|
Working flow: Decoiler--feeding--punching--roll forming--cut to length--output table Equipment list: NO.ProductQuant.1Manual decoiler12Mai... |
|
|
|
The profile drawing of the roof sheet crimping machines Curving Machine
1.Main power: 1.5 KW
2.Hydraulic power：4KW
3.Punching speed：0—8m/m... |
供应产品
Same products
