motors ac cam controller
KTJ15 Series Cam controller (hereinafter referred to as cam controller) is suitable for AC 50Hz, voltage 380V below the power line, used to change the three-phase asynchronous motor stator circuit connection or rotor circuit resistance value, to directly control the motor starting, speed regulation, braking or commutation.
Model: KTJ15 cam controller
AC cam controller: KTJ
Design serial number: 15
32: rated working current is 32A
Line code: D
L indicates that the handle is vertical.
Main technical parameters
Handle force: not more than 40N.
Maximum control gear: left and right six gears.
Maximum number of control loops: 15.
The electrical performance of the auxiliary contact group of the controller conforms to the technical specifications of the master controller.
The 32A controller can directly control 15 kW and below winding motors.
The 63A controller can directly control 30 kW and below winding motors.
Mechanical life is no less than 3 million times.
Other supplier products
|
|
cabin for overhead crane |
cabin for overhead crane SQJ7 is more suitable for 5-50t middle and large-scaled overhead and gantry |
|
|
grid load resistor |
Stainless resistor applying to AC circuit 1140V,DC circuit 1000V.the power of resistor up to 5.6 KW,suitable for matching engine. |
|
|
motor potentiometer joystick controller |
Main technical parameters
Temperature requirements: working temperature: -20 C ~60 C
Handle less than 50N
Contact characteristic power supply co... |
|
|
overhead crane cab seats |
overhead crane cab seats is used to control the start,speed-regulation,commutation and brake of motors contained in crane transport ma |
|
|
crane cabin for high tower crane |
crane cabin for high tower crane SQJ7 is more suitable for 5-50t middle and large-scaled overhead and gantry |
供应产品
Same products
