Expanded Graphite Hastlloy Spiral Wound Gasket
We have our new gasket manufacturing facility. Our spiral wound gasket widely use in oil and gasket industrial ,chemical industrial, mining industrial ,power station and most industrial factory . Hastelloy C276, Alloy 276 (UNS N10276), A Nickel-Base Alloy with Resistance in a Wide Range of Aggressive Media.Alloy 276 is a nickel-molybdenum-chromium-iron-tungsten alloy which is among the most corrosion resistant alloys currently available. Alloy 276 also has good high temperature strength and moderate oxidation resistance although the alloy will eventually form embrittling high temperature precipitates. Alloy 276 has been available for several years and has been used in ASME Boiler and Pressure Vessel related construction.Spiral Wound Gasket C276 Style applications:> Chemical and petrochemical processing;> Flue gas desulfurizationg;> Pulp and paper equipments;> Industrial and municipal waste equipments.General Corrosion:> The alloy 276 is used in a range of environments from moderately oxidizing to strongly reducing;> One application is in the more corrosive area of flue gas desulfurization system, such as outlet ducting;> Alloy 276 compared to that of SS316 in the "GREEN DEATH" simulated scrubber solutionGreen Death Solution (Boiling)Corrosion Rate, MPY (mm/a) 3162763% Hydrochloric AcidDestroyed26.5 (0.67)> Alloy 276 is considered inert to seawater and is used in many seawater, brine, and high chloride environments, even at strong acid pH values;> The high level of nickel and molybdenum provides extreme resistance to chloride stress corrosion cracking.Chemical Analysis:CMnPSSiCrNiMoWVCoFe0.0060.1500.0050.0020.0315.50Balance16.03.500.150.106.00Mechanical Properties:Minimum properties (ASTM B 575)0.2% Yield Strength Minimum psi (MPa)Ultimate Tensile Strength Minimum psi (MPa)Elongation (% in 2'') MinimumHardness Rb Minimum41,000 (283)100,000 (690)40100
Other supplier products
|
|
|
Heat exchanger gasket is a term used for gaskets used in shell and tube type heat exchangers. This is usually a metal jacketed gasket with a soft f... |
|
|
|
Rring Joint gaskets come in two basic types, an oval cross section and an octagonal cross section .These basic shapes are used in pressures up to 1... |
|
|
|
WindingWindingw/ Inner RingWindingw/ Centering RingWinding w/ Inner& Centering RingWinding Materials:Max. Temp. RangeStainless Steel 304760°CStainl... |
|
|
|
The IX Seal-rings are designed and used where the NORSOK CFC (Compact Flange Connections) are in use. The rings come in three different kinds of st... |
|
|
|
1.process the metal flat gasket to teeth-shaped metal gasket of 90°contained angle. Internal and external positioning ring. To protect flange and e... |
供应产品
Same products
