oil density Tester FDT-1531
Application range
Mechanical impurities of petroleum products and additives analyzer is designed in accordance with the national standards GB/T511 "petroleum products and additives Determination of mechanical impurities (gravimetric method) provides requirements applicable to the determination of the various types of light petroleum products, heavy oil, lubricants and additives mechanical impurities content.Features
1, take the warm-up, and test integrated structure design, reasonable structure, beautiful appearance, reliable quality.
2, circuit temperature control table to control electric heating plate temperature, so that the temperature of the heating plate thermostat controlled, in order to meet the test needs.
3, using a solid-state regulator regulating insulation funnel input voltage, thereby controlling the size of the heating power to achieve the purpose of heating required insulation funnel.
4, filtration devices connected by a vacuum pump and filter flask fully protected difficult to filter the sample measurement.Specifications
1 Power supply: AC 220V ± 10%, 50Hz.
2, water bath heating power: 1000W.
3, the water bath temperature control range: room temperature ~ 90 ℃ adjustable.
4, the water bath temperature display: LED digital display.
5, the water bath temperature control accuracy: ± 1 ℃.
6, funnel Temperature range: room temperature ~ 90 ℃ adjustable.
7, funnel Temperature Display: LED digital display.
8, the funnel temperature control accuracy: ± 2 ℃.
Dimensions: control box 390 (L) x 260 (width) × 590 (H);
Water bath 90 (L) x 290 (width) x 370 (H).
10, the ambient temperature: ≤ 35 ℃.
11, relative humidity: ≤ 85%.
12 Total power consumption: not more than 1200W.
Other supplier products
|
|
FDT-0431 |
产品名称： 全自动凝点、倾点测定仪
产品型号：FDT-0316
购买数量： 起订数量：1 购买
标签：凝点、倾点、浊点、冷滤点、冰点、结晶点、低温特性、低温性能
适用范围
全自动凝点、倾点测定仪按国家标准GB/T510、GB/T3535《石油凝点•倾点测定法》规定设计制... |
|
|
FDH-0171润滑油抗乳化性能测定仪 |
适用范围
该仪器为国内首创产品，代替原有的有纸记录仪，仪器采用液晶触摸屏全自动控制系统，操作人员只要把试样放进仪器里，仪器自动检测、打印结果，整个过程无需人工操守。其原理是将试样、蒸馏水和铜催化剂线圈一起放到玻璃试管内，然后把它放进氧弹中，氧弹在室温下充入氧气，放入规定温度的油浴中... |
|
|
FDH-0901热处理油氧化安定性测定仪 |
【
适用范围
热处理油氧化安定性测定仪适用于检测热处理油的氧化安定性。操作时将装有试样的氧化管放入温度为165℃的加热浴中通氧24小时，试验结束后用粘度和残碳增加值来判断热处理油的氧化程度。
功能特点
1、本仪器每个试验采用单独的气路控制系统，气路通过两道压力控制，确保流量的控制准确率... |
|
|
oil density Tester FDT-1531 |
Application range
The calorific value of automatic oil tester complies with GB/T384, electricity, coal, paper, petrochemical, cement, agriculture ... |
|
|
Automatic Cleveland Open-Cup Flash Tester FDT-0131 |
Fully automatic viscometer FDT-0471
Application range
Comfirm to GB/T265-88, GB/T11137-89, ISO3104, ASTMD445, ASTM D446 Function Features
1, inn... |
供应产品
Same products
