Rain Chamber
Bay Area Test Equipment Inc is one of the leading rain chamber manufacturers and suppliers,Website:, welcome to buy and wholesale cheap and best rain test chambers from us.
Rain Chamber
Rain Chamber are widely used to test anti-rain and waterproof performance for auto parts, household appliances and other products
Specification & Technical data
Grade
IPX1
Test name
Vertical water dripping test
Sample position
a.Place sample on the rotation table with adjustable 1-17r/min b.Distance between the top side of the sample and the spout less than 200mm
Test condition
The water dripping rate is 1+0.5 mm/min,spacing between dripping hole 20mm
Test time
10 min
Grade
IPX2
Test name
15° water dripping test
Sample position
a.15 angle between one side of the sample and the vertical line b.Distance between the top side of the sample and the spout less than 200mm. c.Turn to test another side and repeat it 4 times.
Test condition
the water dripping rate is 3+0.5 mm/min,spacing between dripping hole 20mm
Test time
4×2.5 min(total 10 min)
Grade
IPX3
Test name
Water pouring test
Test method
Oscillated water pouring test device
Sample placement
a.Select pendulum tubes (Φ16mm) with appropriate radius(0.4/0.6m/0.2/0.8/1.0/1.2/1.4/1.6m) and make the sample table height equals to the diameter of pendulum tubes .
b.Place sample on the table(does not move) and dstance between the top side of the sample and the spout less than 200mm.
Test condition
Water flow rate is calculated on the basis of the number of the spray hole of the pendulum tubes, each hole equals to 0.07 L/min.During testing, the spray hole spray water to the sample on both side of the midpoint of the pendulum tubes with 60°swinging, and the sample is placed in the center of the semicircle of tubes. The tube swings 60°respectively back and forth, total 120. It takes about 4s to swing (2×120°) once a time.
Test time
10 min
Grade
IPX4
Test name
Water splashing test
Test method
Oscillated water pouring test device
Sample placement
a.Select pendulum tubes (Φ16mm) with appropriate radius(0.4/0.6m/0.2/0.8/1.0/1.2/1.4/1.6m) and make the sample table height equals to the diameter of pendulum tubes .
b.Place sample on the table(does not move) and dstance between the top side of the sample and the spout less than 200mm.
Test condition
Water flow rate is calculated on the basis of the number of the spray hole of the pendulum tubes, each hole equals to 0.07 L/min.During testing, the spray hole spray water to the sample on both side of the midpoint of the pendulum tubes with 90°swinging, and the sample is placed in the center of the semicircle of tubes. The tube swings 180°respectively，total 360°.It takes about 12s to swing (2×360°) once a time.
Test time
10 min
Grade
IPX5
Test name
Water spraying test
Test device
The spout diameter of the nozzle is 6.3mm；
Test condition
Distance between the top side of sample and the spout is 2.5~3m and the water flow rate is 12.5 L/min (750 L/h)；
Test time
The time is calculated on the basis of the surface area of the sample，each square meter equals to 1min(exinclude installation area), the minimum time is 3 min
Grade
IPX6
Test name
Intensive water spraying test
Test device
The spout diameter of the nozzle is 12.5mm
Test condition
Distance between the top side of sample and the spout is 2.5~3m and the water flow rate is 100 L/min (6000L/h)；
Test time
The time is calculated on the basis of the surface area of the sample，each square meter equals to 1min(exclude installation area), the minimum time is 3 min
Other supplier products
|
|
|
Bay Area Test Equipment Inc is one of the leading salt spray test chamber manufacturers and suppliers,Website:, welcome to buy and wholesale c... |
|
|
|
Bay Area Test Equipment Inc is one of the leading thermal shock test chamber manufacturers and suppliers,Website:, welcome to buy and wholesal... |
|
|
|
Bay Area Test Equipment Inc is one of the leading rapid-rate temperature change chamber manufacturers and suppliers,Website:, welcome to buy a... |
|
|
|
Bay Area Test Equipment Inc is one of the leading burn-in room manufacturers and suppliers,Website:, welcome to buy and wholesale cheap and be... |
|
|
|
Bay Area Test Equipment Inc is one of the leading humidity test chamber manufacturers and suppliers,Website:, welcome to buy and wholesale che... |
供应产品
Same products
