Section Mill
Section MillSection mills are primarily used to mill sections in the casing for: Sidetracking, gravel packing, and/or perforation zones. GAOTON section mill is available in a variety of Casing sizes, ranging from 4 1/2" to 13 3/8". The blades are dressed so that all blades simultaneously mill the casing, with the milling rates usually limited by the ability of the fluids to remove the cuttings from the hole.Please specify when ordering:●Tool model●Size and weight of Casing to be milled●Top connectionTechnical Parameters--Section Mill Model DXG114 DXG127 DXG140 DXG168 DXG178 Casing Size in 4 1/2 5 5 1/2 6 5/8 7 Body O.D in 3 7/8 4 1/2 4 1/2 5 3/4 6 Fishing neck O.D in 2-3/8REG 2-7/8REG 2-7/8REG 3-1/2REG 3-1/2REG Model DXG1194 DXG219 DXG245 DXG298 DXG340 Casing Size in 7 5/8 8/8 9 5/8 11 1/4 13 3/8 Body O.D in 6 1/2 7/8 8 9 1/4 11 1/2 Fishing neck O.D in 3-1/2REG 4-1/2REG 4-1/2REG 6-5/8REG 6-5/8REGIf you have any further requirements, please feel free to contact us
Other supplier products
|
|
|
Rotary KellyKelly is the drive part of whole drill string, it transmit the torsional energy from the rotary table to the bit in the bottom of the h... |
|
|
|
Type DD ElevatorType DD center latch elevator with square shoulder are suitable for handling drill collar, casing and tubing. The load ranges from ... |
|
|
|
Taper TapThe Taper Tap is especially used for tapping and fishing the fallen substances in the hole from the inner hole,like oil tubing, drill pipe... |
|
|
|
Spray PumpThe spray pump adapt single-stage, single suction, horizontal cantilever centrifugal pump. It is mainly used for spraying, cooling, lubri... |
|
|
|
Heavy Weight Drill PipeHeavy Weight Drill Pipe (short for HWDP) is also called Heavy Wall Drill Pipe. It is an intermediate weight drill stem compo... |
供应产品
Same products
