Control Box-Feeder Terminal Unit

Control Box-Feeder Terminal Unit

The feeder terminal unit(FTU) is a new HV switch control device of control cabinet enclosures equipped with both the imported DSP high-speed sampling chips and the high-performance ARM chips, and can fast and stably finish the monitoring on the switch.

Industrial feeder scada remote terminal unitby our electric power equipment companyhas such functions as the protection, measuring, controlling, monitoring, communication, remote control, and so on and features high integration level, flexible configuration, and user-friendly interface. Electrical control cabinet are widely applied to the radiant and ring network power supply systems.

FTU outdoor control electrical control box can help the systems identify transient and permanent line faults. Outdoor control box eliminate the impact of transient line faults automatically, isolate the permanent fault segments to avoid prolonged power failure in a large area, and automatically recover the power supply in fault-free areas, so as to realize the automation of power distribution network in an economical and practical way.

Key Functions of Control Box-Feeder Terminal Unit

S/N	Functions	Remarks
1	Three section protection	Each protection can be vote back independently
2	Over-current count protection	Failure time count, output after meeting the number of
		times, output mode is optional
3	Zero-sequence protection	Output options: exit, alarm and tripping
4	Pre - voltage fault protection	Protection can be accelerated when combined at fault
		point
5	Post-reclosing acceleration	Vote back independently
6	Constant time-lag	The protection time is fixed
7	Inverse time limit	Multiple protection curves optional
8	Ring network protection	Hardware needs to configure double PT
9	Event Log	The recording time is exactly millisecond
10	Status enquiry	The main content is remote control and remote
		metering
11	Remote programmable	Remote input support programmable

Communication Protocols of Control Box-Feeder Terminal Unit

S/N	Protocols	Remarks
1	IEC balanced
2	IEC unbalanced
3	IEC
4		Now support level 3
5	Modbus

Technical Parameters of Control Box-Feeder Terminal Unit

	Items	Rated value	Remarks
1	Operating ambient temperature	-40 ~ +85℃
2	Environmental relative humidity	10 ~ 100%
3	Maximum absolute humidity	35g/m3
4	Atmospheric pressure	66~ 108kPa
5	Working voltage	AC220V±20%
6	Working voltage frequency	50HZ±5HZ
7	Power consumption	≤15W
8	Protective exit time	<35ms	Protect inherent action time at 1.5 times fixed value
9	Insulation impedance	>100MΩ/ DC500V
10	Power frequency withstand voltage	2k	Power circuit to ground
		500	On-off input circuit to ground
		500	Output circuit to ground
		2k	AC circuit to ground
		2k	AC circuit and power circuit
		1500	Between on-off input circuit and output circuit
11	Impulse withstand voltage	5k	Power circuit to ground
		1k	On-off input circuit to ground
		1k	Output circuit to ground
		5k	AC circuit to ground
		5k	AC circuit and power circuit
		1k	Between on-off input circuit and output circuit

Characteristic Functions of Control Box-Feeder Terminal Unit

Feeder terminal unit is small in size and large in quantity. FTU electrical control cabinet is equipped with a transmitter for direct AC sampling. It is resistant to high temperature and cold and is suitable for outdoor harsh environments.

Unlike the scada remote terminal unit, the amount of data collected by FTU electronic control box is small, the requirement of communication rate is low, and the requirement of reliability is high.

FTU outdoor control box can be manufactured by a high-performance single-chip microcomputer. In order to adapt to the harsh environment, industrial chips that can work at 75 ℃ shall be selected, and they shall be protected against lightning, rain and moisture through appropriate structural design.

Application of Control Box-Feeder Terminal Unit

At present, feeder terminal units power control box as one popular type of distribution electrical box have been widely deployed in column switches, ring network cabinets, switching stations, power control boxes, and other places on the distribution network line to realize the "three remote" automation functions of remote signaling, telemetry and remote control of remote primary equipment.

As an information and data communication tool, a computer network provides a powerful communication means for industrial electrical cabinet and provides a reliable basis for realizing the networked control of distribution automation system devices. Fieldbus technology and GPRS wireless communication technology inject new vitality into the implementation of feed automation. Driven by network, communication and other information technologies, distribution automation is developing from spontaneous Island automation to unified and systematic comprehensive automation.

In the past development process, Gopowerhas laid a solid foundation for technical research and development,production management, product testing, after-sales service and system control. We have been working hard to make progress, and we firmly believe that we will certainly make greater contributions to the national smart grid construction.

Other supplier products

	Power Distribution Equipment	The intelligent AC/DC power distribution box is a distribution automation measurement and control terminal applied to line distribution transformer...
	Control Box-Feeder Terminal Unit	The feeder terminal unit(FTU) is a new HV switch control device of control cabinet enclosures equipped with both the imported DSP high-speed sampli...
	SF6 Gas 11 KV Load Break Switch	The 11kv load break switchis suitable for the distribution network with the highest voltage 11kV, the rated current 630A, and the rated frequency 5...
	Centralized Type DTU	BD-163 distribution automation remote terminal (hereinafter referred to as the distribution terminal) is a new generation of power distribution ter...
	Control Box-Feeder Terminal Unit	The feeder terminal(FTU) is a new HV switch control device of control cabinet enclosuresequipped with both the imported DSP high-speed sampling chi...

供应产品

Same products

	Temperature Controller	卖方: Tinko Instrument (Suzhou) Co., Ltd.	Tinko temperature controller industrialcan improve process efficiency, product quality and minimi...
	Sequence Valve Gate Controller	卖方: Tinko Instrument (Suzhou) Co., Ltd.	Tinko hydraulic valve gate controllerenables control of valve gate flow sequence and timing for p...
	TSC-02 Stand Alone Controller	卖方: Tinko Instrument (Suzhou) Co., Ltd.	Tinko TSC-02 integrated dual zone temperature controlleris suitable for small mold. The portable ...
	TSC-01 Stand Alone Controller	卖方: Tinko Instrument (Suzhou) Co., Ltd.	Tinko TSC-01 integrated single zone hot runner temperature controller is suitable for small mold....
	Touch Screen Hot Runner Controller	卖方: Tinko Instrument (Suzhou) Co., Ltd.	M20 series touch screen hot runner temperature controllers are newly developed with latest achiev...