Solar Panel Fracture Testing Machine
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Application
The machine is widely applied in:
Mechanical Impact Performance Evaluation: Assess PV module resistance to impact loads.
R&D Validation: Verify impact resistance of modules during development stages.
Certification Testing: Compliant with IEC 61730-2004 for electrical safety and mechanical performance.
Transport and Storage Safety Assessment: Simulate handling and installation shocks.
Material and Design Comparison: Evaluate impact performance of different module materials or backsheet designs.
Quality Control and Reliability Testing: Ensure consistent module mechanical integrity before market release.
Standards
IEC 61730-2004 – Photovoltaic (PV) Module Electrical Safety and Mechanical Performance Requirements
Parameters
| Item | Technical Parameter |
|---|---|
| Impact Height | 300–1220 mm, adjustable |
| Sample Frame Inner Dimensions | Customizable according to module size |
| Frame Protective Strip | Rubber strip, 3 mm thick × 15 mm wide, Shore A50° hardness |
| Safety Protection | Protective guard rails on both sides |
| Impact Bag Weight | 45.5 ± 0.5 kg |
| Impact Bag Filling | Lead spheres, 2.5–3.0 mm diameter |
| Power Supply | 220 V AC, motor-driven |
| Compressed Air | 3–5 kg/cm² (auxiliary air source) |
Accessories
Sample Frame: Customizable dimensions with protective rubber strips.
Impact Bag: 45.5 kg weight filled with lead spheres.
Motor: Drives the impact mechanism, powered by 220 V AC.
Safety Guard Rails: Installed on both sides for operator protection.
Compressed Air System: 3–5 kg/cm² to assist smooth impact action.
Lead Spheres: Diameter 2.5–3.0 mm, replaceable for maintenance.
在线联系供应商
Other supplier products
 |
Micro Rapid Closed Cup Flash Point Tester(Pensky Martens) | Whats/App: +86 156 1874 6768 Web: standard-groups.com Automatic Flash Point Tester designed for accurate and repeatable determination of the flas... |
 |
Reciprocating Friction and Wear Testing Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applicable Standards ASTM Standards: Formulated by the American Society for Testing and Ma... |
 |
Torch and Grit particle tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application You can use the apparatus in the following scenarios: Battery housing materia... |
 |
Oxidizing Solids Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Conforms to UN Recommendations on the Transport of Dangerous Goods - Manual of Tests and Cr... |
 |
Fully Automatic Falling Sand Abrasion Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.comv The Fully Automatic Falling Sand Abrasion Tester is designed to evaluate the wear resistan... |
Same products
 |
Two-Shot Injection Molds | 卖方: WIT MOLD LIMITED | Two-Shot Injection Molds Advantages of two-shot injection molding The benefits of Double Inject... |
 |
precision injection molding | 卖方: WIT MOLD LIMITED | precision injection molding Precision injection moldingis a method demanding unparalleled accura... |
 |
Custom Plastic Molds molding | 卖方: WIT MOLD LIMITED | Custom Plastic Molds molding Plastic Molds molding servicesprovide many extremely versatile part... |
 |
Thermoset Molding | 卖方: WIT MOLD LIMITED | Thermoset Molding Key Aspects of Thermoset Molding Materials: Thermosetting Polymers:These inc... |
 |
PE Film Scrap, Rolls, Bale, Regrinds, Lump, LLDPE, HDPE, LDPE | 卖方: Plastic scrap, ferrous and non-ferrous metal scraps supplier for recycling | 我们供应各种PE薄膜废料，包括LLDPE、HDPE和LDPE，可持续发往全球各地的买家。我们的库存包含优质的捆包、卷材、块状和再生料，均经过精心分拣和处理，以满足塑料回收商和制造商的需求。我们保... |
