Kaplan &Tubular Turbine, IEC & ISO Kaplan Turbine, CFD Kaplan Turbine Supplier
Kaplan & Tubular Turbine
Kaplan &Tubular Turbine, IEC & ISO Kaplan Turbine, CFD Kaplan Turbine Supplier
Kaplan Turbine is suitable for medium & low water head and large flow power plants. With same water head, the Kaplan runner speed is higher than that of the Francis'. The Kaplan runner blade can be either fixed and rotatory. The key components include: Kaplan runner, Distributor, Main shaft, Main shaft seal, Turbine guide bearing, Governor, Draft tube, Spiral case.
Tubular Turbines are suitable to lower water head, is a kind of horizontal turbine with straight flow channel. There is no spiral case in Tubular turbine, and its blades can be fixed or rotatory. The key components include: Tubular runner, Distributor, Turbine guide bearing, Governor among other.
Our Kaplan &Tubular Turbine has the features with Kaplan Turbine Design, Kaplan Turbine Advantages. Best quality and factory price will give you
Application scope:
|
Kaplan turbine |
Tubular Turbine |
|
|
Water Head: |
3 ~ 80m |
2 ~ 25m |
|
Output: |
||
|
Frequency: |
50/60HZ |
50/60HZ |
|
Runner Dia.: |
1 ~ 11m |
1 ~ 7m |
We also provide Casting Pelton Runner, Forged Pelton Runner, Casting Guide Vane, Francis Runner Band Heat Treatment, Pelton Turbine.
Product Introduction
Chemical CompositionforASTM A473S41500andASTM A743CA6NM（%）
|
Material No. |
C |
Si |
Mn |
P |
S |
Cr |
Ni |
Mo |
|
ASTM A473S41500 |
≤0.05 |
≤0.60 |
≤0.030 |
≤0.030 |
||||
|
ASTM A743 CA6NM |
≤0.06 |
≤0.040 |
≤0.030 |
Mechanical PropertyforASTM A473S41500andASTM A743CA6NM
|
Material No. |
σ0.2(Mpa) |
σb(Mpa) |
δ5(%) |
ψ(%) |
Akv(J/cm2) |
HB |
|
ASTM A473 S41500 |
≥620 |
≥795 |
≥15 |
≥45 |
≥50 |
≤295 |
|
ASTM A743 CA6NM |
≥550 |
≥755 |
≥15 |
≥35 |
≥50 |
≤285 |
- With the help of 3D Assembling, through motion simulation, the entire organization interaction can be seen at a glance. This helped a great deal for parts processing and pre-installation.
- Each project will strictly follow manufacturying plan to ensure the delivery date.
- ISO 9001 Quality Managementsystem is carried out to ensure better management control
在线联系供应商
Other supplier products
 |
Francis turbine | Francis turbine Francis turbines are built in a compact structure, with high efficiency, and can be applied to a wide range of water heads. This f... |
 |
Pelton Turbine | Pelton Turbine Pelton turbine is suitable for medium and high water head power plants. The key components are: Pelton runner, main shaft and Nozzl... |
 |
Pelton Turbine Generator | Pelton Turbine Generator Pelton turbine is suitable for medium and high water head power plants. The key components are: Pelton runner, main shaft... |
 |
Pelton Turbine | Pelton Turbine Pelton turbine is suitable for medium and high water head power plants. The key components are: Pelton runner, main shaft and Nozzl... |
 |
Hydro-turbine Units for | This project consists of six hydropower stations, and our company is responsible to provide hydro-turbine products, including Pelton turbine runner... |
Same products
 |
Water Treatment Chemicals | 卖方: reformchem | Water treatment plant chemicals are chemicals used to remove pollutants from water. These chemica... |
 |
Intermediates | 卖方: reformchem | Transition States and Intermediates Organic Chemistry Fine chemical processing is the process of... |
 |
Catalyst & Auxiliary | 卖方: reformchem | Catalyst China&Auxiliary can industrialize many new chemical reactions to provide more and mo... |
 |
PP melt-blown Filt | 卖方: Xinxiang Lifeierte Filter Corp.,Ltd | PP熔喷过滤器由聚丙烯超细纤维组成，在高温下熔化和缠结。不含任何化学粘合剂的纤维形成三维微孔结构，将表面、深层和粗滤网集成在一起。由于滤芯直径方向的纤维和密度形成过滤精度高、污染物同化能力高、压... |
 |
3M 水滤器 | 卖方: Xinxiang Lifeierte Filter Corp.,Ltd | 3M 高流量系列滤芯采用大直径径向褶皱设计，每个滤芯具有高流量，减少了过滤器数量和所需空间。过滤器的绝对额定值在过滤器的使用寿命内提供可重复的出水质量。独特的结构可在单个滤芯中产生高达 500 ... |
