Horizontal FRP Tank Winding Machine
Efficient Horizontal FRP Tank Winding Machine
Horizontal FRP tank winding machineis designed to manufacture horizontal FRP tanks, vessels and other winding molded products. These products manufactured from quality FRP materials feature excellent acid and alkali resistance and ensure there is no toxin release and smell. So they are ideal for containing corrosion liquids such as acid, alkali, salt in the chemical industry.
Normally, three types of winding machines are available. The winding machine HTW-1 and HTW-2 for manufacturing tanks below DN4000mm are generally used in the workshop. However, HTW-3 is recommended to be used on site for manufacturing tanks and vessels in larger sizes. Meanwhile, HTW-3 filament winding machines efficiently reduce the manufacturing cost and solve the transportation problems.
Horizontal FRP tank winding machine for manufacturing small-sized pipes in the workshop.
Feature:
- Microcomputer control systemfor high precision.
- Multiple movement control - manual, semi-automatic or automatic control.
- Various winding methods - spiral winding, circular winding and cross winding
- Convenient operation so long as the users input the parameters.
- Keep low consumption of raw materials and low energy consuming.
- High productivity with experienced tank production technology assistance.
- Full-automatic winding course for less labor cost.
- Easy to install, adjust and maintain.
Horizontal FRP tank winding machine for manufacturing large-sized pipes on site.
Application:
- Septic tank.
- Fermentation tank.
- FRP chimney.
- FRP transportation tank.
- Water treatment tanks.
- Industrial chemical storage tanks.
- Grain silo storage.
- Scrubber, etc.
Specification:
| Code | HTW-1 | HTW-2 | HTW-3 |
| pipe diameter | 500mm to 2500mm | 300mm to 4000mm | 4000mm to 10000mm |
| Pipe length | ≤ 12000mm | ≤ 12000mm | ≤ 12000mm |
| Winding angle | 45° to 90° | 45° to 90° | 45° to 90° |
| Rotating speed of principle shaft | ≤ 45r/min | ≤ 34r/min | ≤ 12r/min |
| Max speed of pulling yarn | ≤ 90m/min | ≤ 120m/min | ≤ 120m/min |
| Max width of yarn | 200mm | 220mm | 220mm |
| Production capacity | 800kg/h | 1200kg/h | 2000kg/h |
| Total installed capacity | 10.5kW | 12kW | 18.5kW |
| Areas covered by production line (L × W) | 18m × 9m | 20m × 10m | 22m × 15m |
Process
FRP tanks manufactured by our advanced equipment have three layers: anti-corrosive inner layer, reinforced structural layer and outer anti-aging layer as shown below. So FRP tanks are manufactured through three steps.
The structure of horizontal FRP tanks
- Anti-corrosive liner layer:The liner layer of FRP tanks refers to impermeable anti-corrosive layers sprayed using airbrush. It is composed of two films of polyester containing anti-corrosive resin in thickness of 3mm with 80% resin content.
- Reinforced structural layer:with resin content of 45% to 50%.
- Outer anti-aging layer:about 0.2mm - 0.5mm in thickness with about 95% resin content.
Step 1: Anti-corrosive liner layer spraying.
Step 2: Winding of reinforced structural layer.
Step 3: Manufacturing outer anti-aging layer.
Inquiry for Our Product
在线联系供应商
Other supplier products
 |
Extraction Machine | Extraction Machine Provides Reliable Demoulding Extraction machine, also known as demoulding machine, is specially made to strip finished FRP, RPMP... |
 |
Continuous Filament Winding Machine | CFW Machines for Manufacturing Quality FRP Pipes Continuous filament winding machine, abbreviated to CFW machine, is designed to manufacture FRP or... |
 |
FRP & RPMP production line is the best solution for manufacturing reinforced plastic mortar pipe (RPMP) and other fiberglass reinforced plastic... | |
 |
Pipe Hydro Tester | FRP Pipe Hydro Tester - Convenient & Precise Pipe hydro tester, as its name implies, is a device for testing the leakage performance and hydro ... |
 |
FRP Grating & Stairs | Fangchen specializes in designing, manufacturing and selling FRP grating and FRP stairs in an extensive range of styles and sizes that are needed i... |
Same products
 |
Y9-35-13.5D-75KW with volume 2834-2893 pressure POPULA boiler centrifugal induced draft fan | 卖方: Popula Group Company 九洲普惠集团公司Limited | Puduct Name: Y9-35-13.5D-75KW with volume 2834-2893 pressure POPULA boiler centrifugal induce... |
 |
Ultrasonic Computerized Tape Cutting Machine (Right Angle) JM-2100 | 卖方: Zhejiang Huaqi Information Technology Co., LTD | Fully automatic cutting, easy operation. Wide application range, high cutting quality, smooth cut... |
 |
24 Cavity Cap Compression Machine | 卖方: Zhejiang Huaqi Information Technology Co., LTD | The 24 Cavity Cap Compression Machine is an advanced piece of equipment designed to meet the dema... |
 |
24 Cavity Cap Compression Machine | 卖方: Zhejiang Huaqi Information Technology Co., LTD | The 24 Cavity Cap Compression Machine is an advanced piece of equipment designed to meet the dema... |
 |
SWT-UME Hot Air Welder Pvc Tarpaulin | 卖方: HEBEI MINGMAI TECHNOLOGY CO.,LTD | SWT-UME Banner Hot Air WelderVoltage: 220V/110VPower: 3000W/2200WFrequency: 50/60HzTemperature: 2... |
