BU/BUT 2-Jaw / 3-Jaw Pull Back Draw Down Power Chuck for O.D.verticality and Parallelism
(1). BU / BUT chuck apply for machining verticality and parallelism have the required workpieces, such chuck a wide range of clampings.
(2). When loading different workpieces, only need to change the clamps to use.
(3).Centrifugal force compensation.
(4). Less maintenance, lower wear, long-term stable accuracy, constant clamping force.
(5). Repeat positioning accuracy up to: 0.02mm.
(6). Chuck diameter range: 130-381 mm, 5 to 15 inch
(7). Material: Steel.
(8). Clamp and pull back the workpiece, with a strong clamping force.
Other supplier products
|
|
NHRD 45 degrees/90 degrees Automatic Quartered Centering Hydraulic Indexing Power Chuck |
(1). NHRD chuck NHR chuck based on the expansion of the center positioning workers to ensure that the workpiece when drilling position accuracy. (2... |
|
|
BN/BT/BH 2-Jaw / 3-Jaw / 4-Jaw Standard Lathe High Speed Hollow Hydraulic Power Chuck |
(1). BN / BT / BH hollow hydraulic chuck with 4 inch, 5 inch, 6 inch, 8 inch, 10 inch, 12 inch, 15 inch, 18 inch, 21 inch, 24 inch size and divided... |
|
|
BUE 3-Jaw Pull Back Draw Down Power Chuck for I.D.verticality and parallelism |
(1). BUE I.D. pull back chuck apply for machining verticality and parallelism have the required workpieces, such chuck a wide range of clampings. (... |
|
|
KL/KLT/KLH 2-Jaw / 3-Jaw / 4-Jaw Long Stroke Solid Hydraulic Power Chuck |
(1). KL / KLT /KLH solid hydraulic chuck with 4 inch, 5 inch, 6 inch, 8 inch, 10 inch, 12 inch size and divided into 2- jaw type, 3-jaw type, 4-jaw... |
|
|
NHU 45 degrees/90 degrees High-Speed Automatic Quartered Hydraulic Indexing Power Chuck |
(1). Due to the small outer diameter of the chuck, suitable for small CNC lathes. (2). In the work of no loss of grip, the smaller hydraulic pressu... |
供应产品
Same products
