Micro Powder Mill

GKW Micro Powder Millis mainly used in chemical industry such as grinding glass, rubber, pesticides, enamel, paint, phosphate fertilizer, paper. Hardness below seven Moh's hardness following humidity below 6% non-flammable and non-explosive materials. Such as talc, barite, calcite, limestone, manganese ore, iron ore soil, chrome ore, quartz, gypsum, bentonite, etc.

Micro Powder Mill Technical & Structural Benefits:

Finished particle size 400 mesh -1250 mesh (stepless adjustment);

Breakthrough hard materials and powdery materials, and grind the materials such as talc and fly ash;

Low cost of equipment wearing parts;

Convenient equipment maintenance, maintenance & replacement of wearing parts;

Low energy consumption and high output, for users to create better economic results;

Energy conservation and environmental protection.

odel	Max Feeding Size	Product Fineness (mash)	Capacity	Total Installed Power
GKW970	≤10mm	400-1250mesh	500-3200kg/h	120kw
GKW1270	≤10mm	400-1250mesh	1000-6500kg/h	225kw

The micro powder grindingmill is a highly efficient flour milling equipment, which was made on the basis of high-pressure powder mill and was improved by fineness classification technology. The advanced fineness classification technology of Germany and Japan adopts the principle of fluid mechanics. Scientists studied diligently with a quiet mind, and then they designed a new micro powder mill. So they solve the problem of high cost successfully. It is a high-efficiency and high-pressure micro powder mill.The Application Scopes of Micro Powder MillThe micro powder mill is mainly suitable for grinding of conventional materials and the ultra-fine powder processing of non inflammable and non explosive materials, such as kaolin, limestone, calcite, talcum, marble, barite, gypsum, iron oxide red, iron oxide green, aluminum hydroxide, pigment, bentonite, clay, coal, activated carbon and so on, the humidity of which is less than 8%, and the Moh's hardness of which is less than level 6.The Structure Characteristics of Micro Powder MillThe high-pressure micro powder mill mainly consists of the main engine, blower, superfine analyzer, finished cyclone powder collector, bag filter and connecting duct. According to user needs, it can provide with auxiliary equipment such as the hoist, storage bin, electric cabinet, feeder, crusher and so on. In the grinding mill room, the grinding roller assembly is hung on the grinding cradle through the cross arm shaft. The grinding cradle, spindle and the relieving tool post are fixed. The pressure spring is tightly pressed on the outer end of the cantilever housing of the grinding roller bearing chamber by a tension rod. Taking the transverse load axis as the supporting point, the grinding roller is firmly pressed on the inner surface of the grinding ring by the spring pressure.When the motor is rotated through the drive, the blade of the blade is synchronized with the grinding roller, and the roller rolls around the surface of the grinding ring and rotates around itself. The analysis machine drives the rotating of the impeller through the motor drive. The speed adjustment of the analysis machine determines the fineness of the powder. The relieving tool in the relieving tool post and the grinding roller rotate at the same time. Then the grinding roller rotates on the inner surface of the grinding ring and revolves around itself. The analysis machine drives the impeller of the analysis machine through the motor drive device, and the speed adjustment of the analyzer determines the fineness of the powder.The Main Features of Micro Powder Grinder Mill

The application scope of the high-pressure powder mill is much larger than that of the airflow mill.

Compared with other mills, the grinding pressure of grinding roller on the material can provide 800---1200Kg under the action of high-pressure spring. It saves energy. Under the same circumstance of output and fineness, the energy consumption of the system is only 1/3 of that of the airflow mill.

The investment is small and the efficiency is high. Under the same circumstance of output and fineness, the price is only 1/8 of the airflow mill.

Compared with the air mill, the production link is less. Firstly the airflow mill must crush the material of 20mm to the superfine powder of 100 mesh, and the high-pressure micro powder mill can make the material reached the average particle size about 6.5 μm to 12.5 μm for one time, of which the size is below the 20mm.

The grinding device adopts overlapping type multiple stage seal and has good sealing performance.

The dust removal effect of the mill can totally reach the national dust emission standard.

Other supplier products

	Ball Mill	The Handling Materials and Main Types of Ball Mill: Ball mill is a key equipment for grinding materials, widely used in powder-making production li...
	GKC Series Energy-Saving Super-Large Grinding Mill	After years of research and experiment, we have designed the newest GKC series super-large energy saving grinding equipmentwith high efficiency. GK...
	Raymond Mill	Raymond Mill As national powder R&D center, GUIKUANG has made much efforts and contributions for the development of powder industry more than 4...
	GK-PSH Type Water Spray Dedusting Lime Slaker	GK-PSH Type Water Spray Dedusting Lime SlakerModel: A type C typeE type based on different lime slaker capacity GK-PSH Type Water Spray Dedusting L...
	Ultrafine Mill	GKH1032D Ultrafine Ring Roller Mill is a developed kind of grinding mill with optimized design & structure. It is mainly used in deep processin...

供应产品

Same products

	Ultrasonic Computerized Tape Cutting Machine (Right Angle) JM-2100	卖方: Zhejiang Huaqi Information Technology Co., LTD	Fully automatic cutting, easy operation. Wide application range, high cutting quality, smooth cut...
	24 Cavity Cap Compression Machine	卖方: Zhejiang Huaqi Information Technology Co., LTD	The 24 Cavity Cap Compression Machine is an advanced piece of equipment designed to meet the dema...
	24 Cavity Cap Compression Machine	卖方: Zhejiang Huaqi Information Technology Co., LTD	The 24 Cavity Cap Compression Machine is an advanced piece of equipment designed to meet the dema...
	SWT-UME Hot Air Welder Pvc Tarpaulin	卖方: HEBEI MINGMAI TECHNOLOGY CO.,LTD	SWT-UME Banner Hot Air WelderVoltage: 220V/110VPower: 3000W/2200WFrequency: 50/60HzTemperature: 2...
	SWT-UME pvc welding machine portable	卖方: HEBEI MINGMAI TECHNOLOGY CO.,LTD	SWT-UME Banner Hot Air WelderVoltage: 220V/110VPower: 3000W/2200WFrequency: 50/60HzTemperature: 2...