Latex gloves production process
Latex gloves production process
There are several types of gloves. The most common is latex gloves, whose basic raw material is natural latex. Others are made from synthetics, such as polyvinyl chloride gloves, which are suitable for people who are allergic to latex.Nitrile gloves equipment supplierswill take an example of latex gloves today and see how it works.
The first is to pour the pigment into the latex and stir, but if you are making that kind of milky gloves, you don't need to add additional pigments.
After mixing well, if you reach into the latex liquid at this time, you can put on a glove for yourself in a few seconds. It's just that it's still fragile, and it just falls off when you tear it off.
On the other side, a large number of hand molds are always ready. Hand molds are usually made of ceramic or aluminum.
In order to thoroughly wash off the latex residue from the previous batch of gloves, the ceramic hand molds must be sent for cleaning first, and then washed with soap and water.
Rinse again with bleach.
Also use this wheel-type cleaning tool to clean the finger seams, because once there is residue, the new gloves made are easy to have holes.
After washing, hand molds need to drip clean water and let them dry thoroughly.
Next, the hand molds need to be coated with a chemical film first. This is because latex liquid cannot directly adhere to ceramic hand molds. Applying a chemical film can help latex adhere.
After soaking in the chemical liquid, the hand mold will really start to "wear gloves". They are hung in rows and immersed in latex liquid while moving on the assemblylatex gloves production line.
Different factories have different processing methods. Some projects choose not to move the latex liquid by hand. Rows of hand molds are suspended statically. The container filled with latex liquid is moved up. A gel-like film is formed after it comes out.
At this time, the gel-like film has not been shaped. Take off your gloves and try to tear it off.
So the next step is drying and setting. Professionally speaking, this step is called vulcanization. Some assembly lines are collectively left to dry, and they need to be flipped during the process to bake them collectively.
Some choose to hang in rows and spin to dry. After drying, the latex gloves are basically formed. The next thing to consider is how to remove it from the prosthetic hand. The first step in removing is to press the edge.
They need a whole row of round tools to roll out the corners on the arm. With this corner, the gloves can be easily removed from the artificial hand.
Finally, it's time to take off the gloves. You can choose to remove the gloves manually or operate the machine. Generally, gloves made of synthetic materials need to be manually removed. Such gloves are more sticky and difficult to remove than gloves made of natural latex, so it requires manual labor.
There are also some assembly line operations that are relatively rough, and gloves made of natural latex can be automatically removed by alatex gloves making machine, and it is done by directly rushing down with air pressure.
The manufactured gloves also need to be tested before leaving the factory. First, pull on a stick and inflate the glove to check for holes. At the same time, factories generally take samples for testing, and some samples of the same batch will be sent to another workshop for watering inspection to ensure the quality of the products. The staff wore gloves and carefully held up the freshly prepared gloves. Other factories choose to have workers try them on individually.
After testing, you can pack and leave the factory.
We professionally engaged in R&D, design and manufacturing of disposable gloves production lines such as Latex Gloves making machine, Packing, Counting, Intelligent Oiling Machine.
For more information on glove machinery, please click hereto visit our website.
在线联系供应商
Other supplier products
 |
Gloves Counting Machine | Counting Machine By two roller set took the glove from the line. This machine’s two tasks are: 1 glove stacking. 2. Counting the number for ... |
 |
Latex Gloves making machin | Latex Gloves Production Line Product Description IntroductionLatex gloves are one kind of glovesandit is different fromthe general gloves.By the ... |
 |
Punching Hand Moulds Base | Punching Hand Moulds Base Product Description Advantages: 1, adopt the punching process 2, good appearance, low weight 3, low manufacturing cost |
 |
Stripping Machine | Stripping Machine Product Description Driven force comes from the main chain by force passing device. This device has separate system for emergency... |
 |
Glove Intelligent Oiling Machine | Intelligent Oiling Machine This device is for to lubricating the bearing on the hand mould holder. The emission of the oil in the bearing can be e... |
