UV-resisitance TPU
SER—V Series UV Resistant HFFR TPU（105/℃ 80℃Heat-Resistance）
Applied Fields:
HFFR wire & cable with stable, long-term UV resistance property can pass UL105 /90 ℃ ℃ heat-resistance level.
Characteristics:
- ＜1（0.35W/m2, 340nm, 4H/60 &4H/50 ℃ ℃, 48h/168h）after 48h/168h radiation;
- Surface effect: fine and smooth surface and soft-touch feel without heterogeneous, pits, whiten, sticky and etc. defects can return gloss, matte and semi-matte surface effect through control of die temperature.
Technical Data of UV-resisitance TPU
|
Technical Data Sheet |
Model |
||||
|
Material Properties |
Test Standard |
Test Condition |
Unit |
1185D-EMS-1186S |
|
|
General Characteristics |
Material Category |
- |
- |
- |
|
|
Appearance (Light/Semi-matte/Frosted) |
- |
- |
- |
||
|
Extrusion/Injection |
- |
- |
- |
||
|
Physical Characteristics |
Hardness |
ISO 48 |
15S |
Shore A |
82 |
|
Proportion |
ISO 1183 |
- |
g/cm³ |
||
|
Melt Index |
ISO 1133-1:2011 |
190℃/2.16kg |
g/10min |
||
|
Brittle Temperature |
ISO 812 |
- |
℃ |
||
|
Mechanical Properties |
Elongation |
ISO37:2017 |
200mm/min |
% |
442 |
|
Tensile Strength |
ISO37:2017 |
200mm/min |
Mpa |
||
|
Tearing Strength |
ISO34-1:2015 |
500mm/min |
KN/m |
||
|
Hot Air Aging |
Elongation Retention Rate |
ISO37:2017 |
- |
% |
|
|
Tensile Strength Retention Rate |
ISO37:2017 |
- |
% |
||
|
Electrical Performance |
Volume Resistivity |
ASTM D257 |
- |
Ohm-cm |
|
|
Permittivity |
ASTM D150 |
- |
- |
||
|
Combustion Performance |
Vertical Burning Test |
UL 94 |
- |
||
|
Oxygen Index |
ASTM D2863 |
- |
% |
||
|
Feature |
|||||
Is tpu uv resistant? The answer is yes, if you want to know more questions about tpumaterials, please visit our website.
Select the best polymer compounds solutions, there is always one for your application. ATP polymercompound manufacturer's main thermoplastic polyester elastomerproducts are TPU, TPEs, LSZH, XLPE, etc. Widely used in: new energy vehicles, medical equipment, robots, 5G, etc.
在线联系供应商
Other supplier products
 |
TPEs from ATPolymer | TPESale Improve flame-retardant performance: It has obtained UL 94V0 grade yellow card certification (1.5mm-6.0mm), which fully supports the fin... |
 |
Silane Crosslinking LSZH | Silane cross-linked low-smoke halogen-free flame-retardant polyolefin cable material is convenient to use, not only can be quickly cross-linked und... |
 |
High Temperature-resistance TPO | The modification of ATP for polyolefin elastomers mainly reflects the following technical characteristics: In the application of cable insulan... |
 |
TPO Thermoplastic from ATPolymer | As a leading TPO supplierand TPO factory, ATPolymer provides TPO polymerwholesale at good prices. The blend composed of isotactic polypropylene and... |
 |
Injection Molding TPEs | Injection-grade TPE Products Characterization: High fluidity. Soft-touch. Overmolding compatibility with TPE/PP/PE cable. Application T... |
Same products
 |
Irradiation cross-linking LSZH | 卖方: GuangDong Advanced Thermoplastic Polymer Technology Co.,Ltd | Irradiation cross-linking LSZH Silane cross-linked low-smoke halogen-free flame-retardant poly... |
 |
Hight Flame Retardant LSOH | 卖方: GuangDong Advanced Thermoplastic Polymer Technology Co.,Ltd | High hardness LSOHperformance: Fully support the optical cable through the EN 50575:2014+A... |
 |
High Temperature-resistance TPU | 卖方: GuangDong Advanced Thermoplastic Polymer Technology Co.,Ltd | Fully support the cable pass UL 758/1581，80℃/105℃heat resistance test (113℃/136℃, 168Hrs) "Def... |
 |
High Hardness TPEs | 卖方: GuangDong Advanced Thermoplastic Polymer Technology Co.,Ltd | Product description: high-hardness (≥90A) TPU materials, with problems of abnormal glue, surfa... |
 |
High Hardness LSFH | 卖方: GuangDong Advanced Thermoplastic Polymer Technology Co.,Ltd | High Hardness LSFH All or part of the insulation layer, sheath, outer sheath, and auxiliary ma... |
