HJT Technology
New generation mainstream platform cell tech
Introduction of HJT
Heterojunction technology (HJT) is a n type bifacial solar celltechnology, by leveraging N-type monocrystalline silicon as a substratum and depositing silicon-based thin films with different characteristics and transparent conductive films on the front and rear surfaces respectively.
Combining with the benefits of crystalline silicon and amorphous silicon thin-fim technologies, HJT technologyhas excellent photoabsorption and passivation effects, as well as outstanding efficiency and performance. HJT panelsare one of the technologies to improve the conversion rate and power output to the highest level, also represent the trend of the new generation of solar cell platform technology.
Advantages of HJT
Higher Conversion Efficiency
HJT solar cell uses α-Si thin-film as passivation materials to reduce the loss caused by the migration, which could increase the open circuit voltage to 750mV and guarantee the efficiency up to 24% at beginning.
More Energy Yield
Due to the natural bifacial symmetrical structure, bifaciality of HJT solar module could be up to 97%. And the energy yield gains can reach more than 30% benefiting from the power generation on the back side.
Lower Degradation Rate
HJT solar cells are made of n-type wafer which does not have B-O bond, resulting in no LID. TCO film on HJT solar cell is conductive, so the charge won't polarize on the surface, which can avoid PID from the structure.
Better Weak Light Performance
The minority carrier lifetime of monocrystalline bifacial solar cellsis longer, leading a better power generation under weak-light, which is about 0.5%~1% higher than that of bifacial PERC solar cell per watt.
Thinner Wafer Adapted
HJT solar cell can realize 90μm wafer application while ensuring the quality, and can be superimposed with OBB and shingle technology to improve the efficiency and save the cost.
Ultra-low Carbon Footprint
By the end of 2023, Huasun will achieve an estimated carbon footprint of HJT solar module manufacturing as low as 300g/W through ongoing technological research and industrialization.
Infinite future of HJT
Huasun will gradually realize the technical iterations of HJT solar cell from 3.0 (double side μc-Si) , 4.0 (double side μc-si with Cu plating) , 5.0 (full back-contact) to heterojunction-perovskite tandem cells, and eventually reach the efficiency of 28% in mass production. The increase in efficiency will further reduce the LCOE. Combining with the continuous decrease in the cost of silicon wafer, metallization, TCO, equipment and production, HJT will truly become the new generation of mainstream solar cell technology.
Infinite future of HJT
Huasun is planning to fully apply silver-coated copper paste combined with busbar-free technology in 2023. In 2024, through the application of copper plating technology, the silver consumption per watt will be reduced to 0 mg.
Huasun aims to achieve 800W module power output and 28% cell efficiency by 2025 through the superposition of heterojunction and perovskite.
Roadmap of Huasun
Taking HJT as the core, Huasun keeps enhancing clients' confidence of solar energy's future via higher product efficiency, more stable power generation performance, better quality assurance and platform-based technology expansion capabilities.
After more than two years of unremitting efforts, Huasun has not only achieved the leap from HJT 1.0 (double side α-Si) to 2.0 (single side μc-Si) in technical terms, but also transformed the technical results into mass production, and become the world's largest HJT manufacturer, with the capability of providing high-efficient HJT solar products in a long-term and stable manner to the market which is in high demand.
At present, the highest efficiency of HuasunHJT solar cells in mass production has reached 25.61%, as in the leading position of PV industry. With the premise of ensuring cell efficiency, the company is constantly exploring the methods of cost reduction of HJTsolar cells by taking measures of thinning the silicon wafer and introducing silve & copper paste, in order to accelerate the pace of industrialization and marketization of this high-efficient solar cell technology.
We provide bifacial solar panel technology, mono bifacial, half cut bifacial, efficiency of bifacial solar panels, residential rooftop solar, etc. For more information, please feel free to contact us!
在线联系供应商
Other supplier products
 |
Himalaya G12 Series | Main Features of Huasun EnergyHimalaya G12 Series N-type 210mm HJT Solar Cell Power Output Range: 615W to 720W Module Efficiency Range: 21.8... |
 |
Commercial & Industrial | Ningguo 15MW C&I Rooftop Location: Anhui, China Capacity: 15MW Power generation: 16,160,000kWh/year Coal saving: 6,464tons/year CO2 emissi... |
 |
HJT Technology | Introduction of HJT Heterojunction technology (HJT) is a n type bifacial solar celltechnology, by leveraging N-type monocrystalline silicon as a s... |
|
|
HJT Technology | New generation mainstream platform cell tech Introduction of HJT Heterojunction technology (HJT) is a n type bifacial solar celltechnology, by le... |
 |
HJT Solar Cell | What Is HJTSolar Cell? Huasun hjt solar cell technologywas made of ultra-thin N-type silicon wafer which employs SMBB and μc-Si technology. The... |
Same products
 |
Comfortable Seven-Piece Rattan Sofa Set With Footstool | 卖方: Zhejiang Dingge Industry Co., Ltd. | Welcome to our collection of premium outdoor furniture, where comfort meets sustainability. Intro... |
 |
Introducing the Fold-Out Armchair: A Space-Saver for Every Office | 卖方: Lishui Kangfeilong Tourist Products Co., Ltd. | Maximize comfort and minimize clutter with our Fold-Out Armchair. This innovative seating solutio... |
 |
Colorful contemporary styled conference chair MP003 Yumeya | 卖方: Heshan Youmeiya Furniture Co., Ltd | ①Size(mm): H790*SH460*W460*D525mm②Material: Steel③Can not be stacked④Warranty: 10 years frame war... |
 |
Sophisticated and Stackable conference chairs MP002 Yumeya | 卖方: Heshan Youmeiya Furniture Co., Ltd | ①Size: H830*SH480*AW535*D525mm ②Material: 1.8mm Steel in chrome finish ③Can be stacked 10 pcs ... |
 |
Durable and luxury french wedding chair YSM006 Yumeya | 卖方: Heshan Youmeiya Furniture Co., Ltd | ①Size: H910*SH470*W495*D630mm ②Material: 2.0mm Aluminum ③Can not stacked ④COM: 2.0 yards ⑤War... |
