GTM-D carbon dioxide fire extinguisher filling machine
The model GTM-D carbon dioxide fire extinguisher filling machine is a special-purpose equipment for filling the carbon dioxide fire extinguishing agent automatically into model MT2-MT7 etc. portable type fire extinguisher. This machine adopts low temperature freeze technique to convert the high pressure carbon dioxide fire extinguishing agent in the gas storing cylinder into low- temperature low-pressure pure liquid state carbon dioxide through the low temperature conversion device in the machine and fill it into the low-temperature fire extinguisher. It does not need heating, pressuring, and has safe, reliable, rapid filling speed, accurate metering, high work efficiency etc advantages. It is an ideal filling equipment for carbon dioxide fire extinguisher production and maintenance factories.
Ⅱ Main Technical Parameters
1. Filling time and filling amount error table of the filling machine.
Parameter
Size
Item MT2 MT3 MT5 MT7
（kg）
Fire extinguishing agent weight (Kg) 0
2—-0.15 0
3—-0.15 0
5—-0.2 0
7—-0.2
（s）
Filling time(s) ≤40 ≤50 ≤60 ≤70The power supply voltage adopts 220V 50 HZ
Working Pressure: 3-10Mpa
Ambient temperature: 5℃-45℃
Freezing range: To be differed from normal temperature by 10℃-15℃.
Other supplier products
|
|
GTM-C Model Carbon Dioxide Filler |
GTM-C Carbon dioxide filler is a new product developed by our scientific researcher after absorbing the advantages and excellency of CO2 filler at ... |
|
|
GFM8-2 powder filler |
GFM型干粉灌装机是我厂参照国内外粉类灌装机的优点结合实际灌装的特点，开发、设计的新产品，采用了真空射流技术，将干粉快速吸入被装筒体，配备高精度的T3806型称重显示仪及MP-T型打印机。使其灌装具备了自动化、计量化。同时利用真空所产生的负压，对过滤器上的残余粉尘进行清除。本机集电子、电器、机... |
|
|
Fire extinguisher pneumatic clamper |
Fire extinguisher pneumatic clamper is invented by our technical man based on manual clamper. It is suitable for fire extinguisher service and prod... |
|
|
3D-SY750 series motor-driven pressure test pumps |
3D-SY750 series motor-driven pressure test pumps researched and produced by our factory are the generation-substituting products of motor-driven pr... |
|
|
JK400 type of locking pipe machine |
JK400 type of locking pipe machine is mainly used for locking & press process of a high pressure hose assembly in mechanical engineering and also c... |
供应产品
Same products
