Hexapod Tumbler Tester
Hexapod Tumbler Tester
Applications:
The Hexapod Tumbler Tester is a popular apparatus used in the evaluation of the appearance retention of carpets.
Standards ofHexapod Tumbler Tester:
Standards ofHexapod Tumbler Tester:
BS EN 1471: 1997,ISO 9405: 2001
IWS test methods 247 & 251,ISO 10361: 2000 (BS)
Wools of New Zealand test methods 247 & 251
Product information ofHexapod Tumbler Tester:
·Widely used in the evaluation of the appearance retention of carpets
·Can test with underlay underneath the carpet
·Provides a rapid method of test - completion within one working day
Test Method ofHexapod Tumbler Tester:
Specimens of carpet are fastened to a flexible backing sheet with double-sided adhesive tape. This assembly is fitted on the inside surface of the drum and can easily be removed at any stage for inspection of the specimens under test. If required, an underlay may be fitted beneath the carpet for direct comparison with normal use.
The drive to the drum incorporates a reversing mechanism to give more realistic pile disturbance, and the required number of revolutions may be preset on a revolution counter. The 3.8kg tumbler has six polyurethane stud feet.
The carpet specimens are treated for 2,000 revolutions, which takes approximately one hour. They are then taken out of the drum on their backing sheet and cleaned using an upright vacuum cleaner simulating practical usage. The specimens are replaced and the treatment repeated, normally six times, giving a total of 12,000 revolutions. After the final vacuum cleaning, the change in appearance is assessed against an appropriate set of ISO reference scales.
Technical Parameters:
Dimensions: 430mm×780mm×400mm(W×D×H)
Power Consumption: 375W
Hexapod Tumbler TesterConsumables:
_ Replacement polyurethane stud feet
_ Drum liner
Evaluation of appearance change:
ISO 9405:2001 specifies the following two evaluation methods
Product Display:
Evaluation of appearance change:
ISO 9405:2001 specifies the following two evaluation methods
| Method A | Method B |
| Illuminationg device with rotary inspection table | Assessment fcial mask |
| Large grey card | Illuminationg device |
| Digital image reference sample card | Digital image reference sample card |
Product Display:

在线联系供应商
Other supplier products
| taber linear abraser | The Taber Linear Abraser incorporates a horizontal arm that reciprocates in a linear motion. Attached to the end of the arm is a precision bearing ... | |
| Zipper Reciprocating Tester | IntroductionZipper reciprocating tester is used to measure the zipper performance of products with zippers, such as clothes, textiles, auxiliary ma... | |
| Fabric Thickness Gauge | Fabric Thickness Gauge Testing Standards: JIS L1096/L1018, GB/T 3820, ISO 5084 Applications: Fabric Thickness Gaugeis an apparatus to measure t... | |
| button snap pull testing machine | Snap Button Tester Testing Standards: ASTM D7142-2/F963, CFR 1500, EN 71 PART 1, GB 6675, ISO 8124, M&S P115A . Product Information: The Snap... | |
| Stone hammer blow testing instrument | Stone hammer blow testing instrument mainly simulates the actual driving condition of the vehicle, and the individual parts of the vehicle body are... |
Same products
| Blanket Flammability Test Machine | 卖方: Standard Groups | Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ... | |
| High Temperature Oxygen Index Tester | 卖方: Standard Groups | The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125... | |
| Limiting Oxygen Index Tester | 卖方: Standard Groups | The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb... | |
| Vertical Flammability Tester | 卖方: Standard Groups | Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe... | |
| 45 Degree Flammability Tester | 卖方: Standard Groups | Application 45 Degree Flammability Tester is used to determine the burning characteristics of te... |
















