Chrysler Bending Tester
Brief Introduction
Chrysler bending tester is designed for bending and folding manner by testing base fabric adhesion of the coating material,
ie mechanical stability of the coating.Design Basis Chrysler laboratory test method LP-463LB-9-01.
This test characterizes the degree of adhesion about the vinyl coated fabric and leather fabric coating material.
Also it can be vinyl coated fabrics, leather, unsupported rupture, whitening, cracking,
lamellar separation of vinyl and other soft furnishings and other materials
Product Description：
A tester simultaneously tests four samples, including three bend specimens and a folded specimen.
When the bending jig sample is clamped at both ends, and taut, holding one end is fixed and the other end of the horizontal movement,
the bending test.The folded ends of the sample close clamped between two opposing plates, a 12lb load is applied in the folding area.
If possible, close the flat to exert the appropriate pressure.Bend specimens’ tension with a fixed weight. Tension must be controlled.
Technical Parameter
1. Desktop;
2. Bending test stations: 3 stations;
3. Folding stations: 1 station;
4. Each sample holder may be separately provided on the specimen holder and tension;
5. The rod Working stroke: 70mm; (2.75in.)
6. Fixture spacing: (. 6in) 152mm;
7. Working frequency: 35 times / min;
8. The bending load test: Each sample 36N (8lbf.), Adjustable;
9. The folding load test: After the closure 641N (12lbf.);
10. The bend test specimen size: 76 × 203mm; (3 × 8in.)
11. The folding test sample size: 129 × 129mm; (5 × 5in.)
12. The feature can be manually reset electronic counters;
13. Electronic Counter: 6 digits;
14. Dimensions: 36 × 12 × 20 (length × width × height).
在线联系供应商
Other supplier products
 |
Steaming Shrinkage Cylinder | TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian ... |
 |
45 degree flammability tester | Testing Standards:ASTM D1230, FTMS 191-5908, CFR 16 Part 1610, CALIF TB 117, NFPA 702, GB/T 14644Applications:45 degree flammability tester is desi... |
 |
Precision Double Head Rotary Abrasion Tester with Rotary Platform Dual (Double) Head | DualHeadRotaryAbrasionTesterisadurableprecisionbuiltinstrumentsdesignedtoperformacceleratedweartestsonavarietyofspecimens.ThisAbrasionTestissuitabl... |
 |
Disposable mask airflow resistance tester | Disposable mask airflow resistance testeris used to measure the respiratory resistance and expiratory resistance of respirators and masks under the... |
 |
ISO 22612 Dry microbial penetration resistance tester | The resistance to dry microbial penetration test (ISO 22612) evaluates resistance characteristics of protective equipment to dry bacteria-carrying ... |
Same products
 |
Bakon BK191: The Ultimate Tool for Soldering Iron Temperature Control | 卖方: 深圳市维客修科技有限公司 | 描述 Bakon BK191 烙铁头温度计测试仪 (0 - 600°C) 用于焊接维修、电烙铁温度测试仪、焊台温度计。 烙铁头温度计提供可靠的烙铁头温度控制 紧凑的设计节省您的工作空间... |
 |
MaAnt BGA Solder Paste Halogen-free Lead-free Repair Flux | 卖方: Phonefix | MaAnt UP-79 MY-224 MY-225 halogen-free solder paste for mobile phone/electronic circuit board CPU... |
 |
3 Inch Ceramic Bond Hybird Transitional Polishing Pads For Concrete | 卖方: Xiamen ChinShine Industry and Trade Corporation | – Available Grits: 30, 50, 100, 200,400. – Use wet or dry. Pad Materials –... |
 |
LUOWEI LW-PT03 LW-PT02 CPU芯片植锡硅胶垫 | 卖方: 深圳维客修科技有限公司 | 描述 罗威 LW-PT03 LW-PT02 CPU芯片植锡平台带耐热硅胶垫，用于电子/手机BGA芯片焊接修复。防滑、不鼓起、耐高温。罗威多功能BGA植锡磁力平台具有零误差定位和可扩展底座，适用于... |
 |
AWithZ UF20B 超级法拉电容点焊机，用于电池主板 PCB 焊接 | 卖方: 深圳维客修有限公司 | 描述 AWithZ新款法拉电容UF20B点焊机聚能焊接0.4mm可焊铜适用于手机电池主板PCB焊接维修。AWithZ UF20B小型便携式超法拉电容点焊机，配WP110和WP120点焊笔，具有A... |
