Radiant Protective Performance Test Device
Standardized sample clamping program, strictly meet the standards. While taking into account the operation, is simple and generous. The calorimeter has a long service life and stable performance.
Radiant protective performance is an important performance index of flame retardant products, accurate determinate its protective properties, for the selection of materials, research and development of new products, improve the processing technology has important guiding significance.
Fabric radiant protective performance tester is used to determinate the heat radiation performance for fabric single or multi-layer in high temperature environment, widely used and protective clothing in the field of quality inspection work, such as factory protective clothing, fire protective clothing, biochemical protective clothing and so on. In addition, it can also be used to measure the thermal performance of other fire-retardant sheet.
ISO 6942-2002Protective clothing - Protection against heat and fire - Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat
Simplified operation interface, dignified and generous. Easy to operate to reduce the possibility of misuse.
Intelligent design, using the host computer for data collection, analysis, and analysis of the results to facilitate the data summary and processing. Programmable scientific are reasonable, easy to master, low configuration requirements.
According to standard ISO 6942-2002 (EN366), the protective of the material can be tested according to two test methods. The first method (method A) is that the sample undergoes a certain amount of heat radiation, in order to reproduce the harsh conditions of the material, and record the appearance changes. The second method (method B) is to place the calorimeter on the back of the sample. The heat is transferred from the back of the sample and the temperature is recorded over time, to determine the level of heat radiation transfer.
Feature
| Infrared quartz tube | 5 tubes |
| The silicon carbide rod heating power | 6.5kW / 220V / 50Hz |
| Silicon rod heating length | 178mm, diameter 8mm |
| Heat source heat flux density | 10kW / m2~ 80 kW / m2adjustable |
| Heat radiation source temperature control | room temperature ~ 1200oC± 5oC(accuracy of 1oC) |
| Heat radiation source temperature sensor | thermocouple (0 ~ 1600oC) |
| The thermal radiation source temperature thermostat | with a PID intelligent adjustment controller |
| Calorimeter heat capacity | about 480.937 J / K, heating area of 50 × 50mm2 |
| Circulating water pump | HQB-3900 / 100W / 220V / 50Hz |
| Air supply | mini air compressor, power 1 / 4HP 220V / 50Hz |
| Dimensions | 1510mm × 650mm × 1220mm |
| Weight | 200kg |
| Test environment | between 15oC~ 35oC, the room should be no air circulation |
在线联系供应商
Other supplier products
 |
protective clothing Antisynthetic blood penetration tester | TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian ... |
 |
fabric textile random tumble pilling tester | Random Tumble Pilling Tester, to determine the pilling and fuzzing characteristics of textile fabrics.Random Tumble Pilling Tester uses stainless s... |
 |
spray water repellency tester | Water Repellency Tester is used to check the water repellency of the fabric by spray test in textile testing laboratory. Suitable for Table cloth, ... |
 |
Anti Synthetic blood penetration tester | TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian ... |
 |
Gakushin Type jis electronic rubbing fastness tester | Rubbing Fastness Tester, designed to carry out a rub fastness test on the surface of leather to determine the amount of ‘marring’ of th... |
Same products
 |
Bakon BK191: The Ultimate Tool for Soldering Iron Temperature Control | 卖方: 深圳市维客修科技有限公司 | 描述 Bakon BK191 烙铁头温度计测试仪 (0 - 600°C) 用于焊接维修、电烙铁温度测试仪、焊台温度计。 烙铁头温度计提供可靠的烙铁头温度控制 紧凑的设计节省您的工作空间... |
 |
MaAnt BGA Solder Paste Halogen-free Lead-free Repair Flux | 卖方: Phonefix | MaAnt UP-79 MY-224 MY-225 halogen-free solder paste for mobile phone/electronic circuit board CPU... |
 |
3 Inch Ceramic Bond Hybird Transitional Polishing Pads For Concrete | 卖方: Xiamen ChinShine Industry and Trade Corporation | – Available Grits: 30, 50, 100, 200,400. – Use wet or dry. Pad Materials –... |
 |
LUOWEI LW-PT03 LW-PT02 CPU芯片植锡硅胶垫 | 卖方: 深圳维客修科技有限公司 | 描述 罗威 LW-PT03 LW-PT02 CPU芯片植锡平台带耐热硅胶垫，用于电子/手机BGA芯片焊接修复。防滑、不鼓起、耐高温。罗威多功能BGA植锡磁力平台具有零误差定位和可扩展底座，适用于... |
 |
AWithZ UF20B 超级法拉电容点焊机，用于电池主板 PCB 焊接 | 卖方: 深圳维客修有限公司 | 描述 AWithZ新款法拉电容UF20B点焊机聚能焊接0.4mm可焊铜适用于手机电池主板PCB焊接维修。AWithZ UF20B小型便携式超法拉电容点焊机，配WP110和WP120点焊笔，具有A... |
