.

Radiant Protective PerformanceRadiant Protective Performance Test Device Test Device

Standardized sample clamping program, strictly meet the standards. While taking into account the operation, is simple and generous. The calorimeter has a long service life and stable performance.
Radiant protective performance is an important performance index of flame retardant products, accurate determinate its protective properties, for the selection of materials, research and development of new products, improve the processing technology has important guiding significance.

Fabric radiant protective performance tester is used to determinate the heat radiation performance for fabric single or multi-layer in high temperature environment, widely used and protective clothing in the field of quality inspection work, such as factory protective clothing, fire protective clothing, biochemical protective clothing and so on. In addition, it can also be used to measure the thermal performance of other fire-retardant sheet.

ISO 6942-2002Protective clothing - Protection against heat and fire - Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat

Simplified operation interface, dignified and generous. Easy to operate to reduce the possibility of misuse.

Intelligent design, using the host computer for data collection, analysis, and analysis of the results to facilitate the data summary and processing. Programmable scientific are reasonable, easy to master, low configuration requirements.

According to standard ISO 6942-2002 (EN366), the protective of the material can be tested according to two test methods. The first method (method A) is that the sample undergoes a certain amount of heat radiation, in order to reproduce the harsh conditions of the material, and record the appearance changes. The second method (method B) is to place the calorimeter on the back of the sample. The heat is transferred from the back of the sample and the temperature is recorded over time, to determine the level of heat radiation transfer.

Feature
Infrared quartz tube 5 tubes
The silicon carbide rod heating power 6.5kW / 220V / 50Hz
Silicon rod heating length 178mm, diameter 8mm
Heat source heat flux density 10kW / m2~ 80 kW / m2adjustable
Heat radiation source temperature control room temperature ~ 1200oC± 5oC(accuracy of 1oC)
Heat radiation source temperature sensor thermocouple (0 ~ 1600oC)
The thermal radiation source temperature thermostat with a PID intelligent adjustment controller
Calorimeter heat capacity about 480.937 J / K, heating area of 50 × 50mm2
Circulating water pump HQB-3900 / 100W / 220V / 50Hz
Air supply mini air compressor, power 1 / 4HP 220V / 50Hz
Dimensions 1510mm × 650mm × 1220mm
Weight 200kg
Test environment between 15oC~ 35oC, the room should be no air circulation


在线联系供应商

至: 千实精密机电仪器检测设备有限公司
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Geotextile Plane Flow Meter
Geotextile Plane Flow Meter Introduction:In order to evaluate the water conveyance capacity of the material, the geotextile surface flow meter was used to measure the permeabl...
flexometer
flexometer Bally Flexing Tester (Flexometer) is designed for flexing resistance test to bending or other types of failure at flexing creases. The Flexometer ...
rca tape friction testing machine
rca tape friction testing machine Tape abrasion test machine make wear test of various surface coating consumption test with mobile , PDA, MP3, CD and laptop, the load 275g, 175g.55...
Tobacco Air Permeability Tester
Tobacco Air Permeability Tester TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian ...
Mask Respirator Breathing Resistance Tester
Mask Respirator Breathing Resistance Tester Mask respiratory resistance tester is used to measure the respiratory resistance and expiratory resistance of respirators and masks under the speci...
供应产品

Same products

Blanket Flammability Test Machine
Blanket Flammability Test Machine 卖方: Standard Groups Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ...
High Temperature Oxygen Index Tester
High Temperature Oxygen Index Tester 卖方: Standard Groups The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125...
Limiting Oxygen Index Tester
Limiting Oxygen Index Tester 卖方: Standard Groups The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb...
Vertical Flammability Tester
Vertical Flammability Tester 卖方: Standard Groups Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe...
45 Degree Flammability Tester
45 Degree Flammability Tester 卖方: Standard Groups Application 45 Degree Flammability Tester is used to determine the burning characteristics of te...