Fabric Static Stress Resistance Tester
Product Name
Fabric Static Stress Resistance Tester
Applicable Standards
DIN 53860 - 1: Inspection of textiles - Inspection of planar fabric sac-like protrusions - Part 1: Static stress bend tube test method
Application Scope
It is used for testing the elbow static stress deformation of textiles such as woven fabrics or knitted fabrics. The testing instrument includes an elbow fabric static stress resistance tester, an elbow fabric protrusion height measuring instrument, a sample preparation template, etc.
Product Features
1. The frame is made of high-quality aluminum alloy, which is relatively lightweight.
2. Equipped with LED lighting source, with high illuminance, clear imaging and easy identification.
3. Ball joint connection, with low sliding friction and smooth movement.
4. Hinged connection for easy clamping of samples.
5. The measuring arm is made of high-quality non-metallic materials, which is light and easy to operate.
Technical Parameters
1. Angle of the upper test arm relative to the vertical line: 10 degrees
2. Spring stiffness: 149N/M, meeting the standard requirement of 150N/M ± 30N/M
3. Wire diameter: 0.3mm
4. Diameter: 3mm
5. Length of the upper test arm: 250mm
6. Length of the lower test arm: 300mm
7. Connection method: Ball joint connection
8. Lighting source: LED with a power of 20W
9. Projection method: Optical imaging with a resolution of 1mm
10. Measuring arm: Hinged connection for easy clamping of samples
11. Dimensions:
- Static stress experiment part: 600mm×600mm×800mm
- Projection measurement part: 400×600×600mm
12. Power supply: AC220V 50Hz
在线联系供应商
Other supplier products
 |
Automotive Wires Low - temperature Impact Tester | Test standard: ISO 6722. ISO 14572. ISO 19642. SAEJ 1128. QC/T 730. JASOD611-2009 Technical parameters: 1) Low temperature impact height: 50-2... |
 |
Automotive Wires Ozone Aging Chamber | Standards ISO 6722: Road vehicles – Electrical cables – Dimensions and test methods. SAE J1128: Low-voltage cables for automotive app... |
 |
Wire and cable smoke density tester | Product Introduction: STD AOTSI-NBS smoke density test chamber, also known as smoke dense bottom test chamber, the test method comes from the Nati... |
 |
Rubbing Color Fastness Tester/ | StandardsBS 1006 D02； ISO 105 D02 X12； AATCC 8 165； GB/T 3920； NEXT TM6 M&S C8 C8AApplicationThis instrument is applicable to the test of color... |
 |
Shoe Lace and Eyelet Abrasion Tester | Meet the standard SATRA TM93 DIN4843 QB/T 2226 SATRA TM 154 BS 5131:3.6:1991 ISO22774 Main uses The shoelace eye wear testing machine is ... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
