Shoe Sole Heat Resistance Tester
Reference standard
EN ISO 20344. EN ISO 8772-1. GB/T 20991-2007. ANSI, JIS, CSA, GB12017-1989. LD50-1994 and other standards
Main uses
The sole heat resistance tester is used to test the heat resistance and temperature insulation performance of finished shoes under high temperature sand and stone heat temperature medium.
Product Advantages
Measures Critical Safety Property: Quantifies the thermal insulation and heat resistance of footwear soles, essential for safety in hot environments.
Standard Compliant: Designed to meet numerous relevant national and international standards for footwear heat resistance and thermal insulation testing.
Simulates Real-World Exposure: Uses a heated sand bath to mimic contact with hot surfaces.
Provides Objective Measurement: Records the actual temperature rise on the inside of the shoe (at the insole).
Controllable Test Temperature: Allows testing at standardized high temperatures (150℃ or 250℃).
Suitable for Finished Shoes: Designed to test complete footwear.
Product Features
Heated sand bath with specific dimensions and minimum sand height.
Heating system capable of heating the sand to controlled test temperatures (150℃ or 250℃).
Temperature control system to maintain the sand bath at the specified test temperature with a certain tolerance.
System for accurately measuring and recording the temperature change on the upper surface of the insole over a specified time (30 minutes), using a copper/copper-nickel thermocouple with a copper disc.
Uses sand of a specific particle size range and volume as the primary heat transfer medium.
May include provisions for using other heat transfer media, such as 5mm steel balls, depending on the specific test standard or configuration.
Fixture or area for placing the finished shoe on the heated sand bath, ensuring good contact.
Robust construction suitable for operating at high temperatures.
Test principle
The sandbox is heated to 150℃， the sand covers the contact point between the sample upper and the sole, and the change of the insole temperature over 30 minutes is recorded, accurate to 0.5℃。
Technical parameters
Sand bath box size: (40±2)cm*(40±2)cm, height: 8cm
Sand height: ≥5cm
Sand size: (0.3 —— 1.0)mm
Sand volume: 5000±250cm
Test temperature: (150±5)℃ or (250±5)℃
Heating power: 2500±250W or more
Heat transfer medium: 5mm steel ball, total mass 4kg
Copper/copper-nickel thermocouple: Solder a copper disc 2±0.1mm thick and 15±1mm diameter
在线联系供应商
Other supplier products
 |
Carton Clamp Tester | Product introduction： This machine mainly aims at the ability of the product to withstand the pressure of lead from the car when the product ... |
 |
360 spray 3D rotary jet head for large tanks | High impact 3D rotary tank washer Model number:STD 20 3D rotary jet head Impeller is driven by cleaning fluid and drives internal reduction mecha... |
 |
Fully Automatic Stripping Machine for Automotive Wires | The fully automatic stripping machine for automotive wires complies with the standards of GB/T2951 - 2008 and IEC60811 *General Test Methods for ... |
 |
Fogging Tester | Standards DIN 75201: Automotive trim material fogging resistance. ISO 6452: Coated fabrics fogging behavior in vehicle interiors. SAE J1756: A... |
 |
Voltage Drop Tester for Automotive Wire Connectors | Technical Features: This instrument features adjustable high - current output, micro - voltage testing, and digital tube display. Main Parameters... |
Same products
 |
Common Rail Injector Valve F00R J02 012 | 卖方: 868983 | Common Rail Injector Valve F00R J02 012 David Chen |
 |
Common Rail Injector Valve F00R J02 005 | 卖方: 868983 | Common Rail Injector Valve F00R J02 005 David Chen |
 |
Common Rail Injector Valve F00R J01 945 | 卖方: 868983 | Common Rail Injector Valve F00R J01 945 David Chen |
 |
Common Rail Injector Valve F00R J01 941 | 卖方: 868983 | Common Rail Injector Valve F00R J01 941 David Chen |
 |
Common Rail Injector Valve F00R J01 924 | 卖方: 868983 | Common Rail Injector Valve F00R J01 924 David Chen |
