Swimming goggles sealing tester
Applicable standards:
Seal test equipment for swimming goggles according to ISO 18527-3
Product Introduction:
The tightness of goggles according to ISO 18527-3 and other types of goggles is essential to guarantee their protection against liquids, gases and vapors. Our test equipment is designed according to the requirements of the new ISO 18527-3 standard and facilitates rapid testing during the production process.
Autoclave testing according to EN 14325.
The (air) permeability of fabrics and seams of protective clothing to chemicals after exposure to different stesses is the degree of product performance grade. Our test equipment is designed in accordance with EN 14325 autoclave test methods.
The instrument is used in laboratories and manufacturing facilities for:
Evaluating the watertightness and sealing performance of swimming goggles.
Assessing the effectiveness of the seal against liquids, gases, and vapors.
Quality control during the production process to ensure consistent sealing integrity.
Research and development of new goggle designs and sealing materials.
Ensuring goggles comply with performance and safety standards like ISO 18527-3.
Product Advantages:
Provides a controlled and objective test for evaluating goggle sealing performance.
Essential for guaranteeing protection against liquid, gas, and vapor ingress.
Designed according to the requirements of standards like ISO 18527-3.
Facilitates rapid testing, making it suitable for production line quality control.
Helps ensure consistent sealing integrity across manufactured goggles.
Product Features:
Based on the test type and application:
Standardized test head or fixture designed to replicate the contours of a face for securely mounting the goggles.
System for applying a controlled positive pressure or negative pressure (vacuum) within the sealed volume of the goggles once fitted to the test head.
Pressure or vacuum sensing system to monitor the applied pressure/vacuum level.
Leakage detection mechanism, typically involving monitoring for pressure/vacuum decay over time.
Timer to control the test duration as specified by the standard.
Control system for setting test parameters and indicating pass/fail status.
在线联系供应商
Other supplier products
 |
Car seat center of gravity measuring tester-QINSUN | Main parameters: Measuring range:refers to the maximum and minimum range of the center of gravity of the seat that the tester can measure. This ... |
 |
(Changan) Automobile wire and wire bending testing machine | Standard: DIN 51211 and ISO 7801 Scope of application: Changan Automobile "JT automobile low-voltage wire technical conditions" standard Techni... |
 |
Fabric Fiber Shedding Degree Tester (Friction) | Instrument Testing Principle Lay the specimen flat and fix it on the holder. Make the wet abrasive attached to the friction head perform reciproca... |
 |
Automotive Wires Ozone Aging Chamber-QINSUN | Standards ISO 6722: Road vehicles – Electrical cables – Dimensions and test methods. SAE J1128: Low-voltage cables for automotive a... |
 |
Impact strength tester for car seat launching headrest | Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, which is a key parameter to simulate vehicle collis... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
