Wyzenbeek or Oscillatory Abrasion Tester
Product introduction:
Wyzenbeek wear resistance tester, also known as Oscillatory wear resistance tester, is used to test the wear resistance of fabrics against standard friction media or metal mesh surface friction movement, especially suitable for automotive decoration and furniture textile product. Instrument regulations American standard. There are 4 friction heads and electronic counter to control the running cycle.
Features：
Easy to control due to the precision electronic digital counter.
The protective cover provides protection and thus more safety.
Four abrasion heads to test samples simultaneously, thus greater efficiency.
Complied Standards：
ASTM D3597. ASTM D4157. CFFA-1A, FED-STD-191/5304. GM2756M, LP-463KB-06-01. LP-463KC-04-01. SAE J 948. SAE J1530. Toyota TSL 5101G 3.9.4 etc...
Working principles：
Install the long strip of sample fabric on the front and rear clamps of the friction head, and apply a certain tension force. Install the friction medium on the arc-shaped friction table to make the sample contact the friction medium and apply a certain load On the sample. The friction table swings back and forth to rub the sample, and after a certain number of frictions, evaluate the change in the breaking strength of the sample
![]()
Standard configuration：
Main machine 1set
Imported rubber pad 8pcs/pack
Imported metal mesh 4pcs/pack
Imported standard abrasive No. 10 cotton canvas (60inches X 5yards)
Power cable 1pcs
Manual 1pcs
![]()
Technical parameter：
1. Modern ergonomic design.
2. The suction device connected to the auxiliary vacuum cleaner.
3. Sealed transmission ensures quiet operation.
4. Test position: 4 heads.
5. Friction table: Curve surface-R100mm, length-400mm
6. Swing radian: 76+/-2mm.
7. Friction rate: 90+/-1/min(double friction).
8. Tension adjustment weight: 340g (tension adjustment range 8.9N-22.25N)
9. Load adjustment weight: 150g (load adjustment range 8.9N-17.8N)
10. Sample tension: 17.8N (adjustable)
11. Sample load: 13.4N (adjustable)
12. Sponge rubber pressure pad: 50X50mm(+/-1mm)
13. Instrument material: Stainless
14. Surface finishing: painting
15. Sample dimension: 245X73mm
16. Product dimension: 50X50X60 (LXWXH)
在线联系供应商
Other supplier products
 |
Textile Bonded Door Drench Tester | I. Product Overview TheTextile Bonded Door Drench Testeris a specialized instrument designed to evaluate the water resistance and durability of te... |
 |
Automotive Bed Liner Strength Testing Machine-QINSUN | Standard ASTM D624(Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers) ISO 37(Rubber, Vulcan... |
 |
Fogging Tester for Automotive & Textile Materials-QINSUN | Standard DIN 75201(Determination of the Evaporation Behavior of Materials in Motor Vehicles) ISO 6452(Rubber- or Plastics-Coated Fabrics &mdash... |
 |
Impact strength tester for car seat launching headrest-QINSUN | Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, which is a key parameter to simulate vehicle coll... |
 |
MARK-II Slip Resistance Tester | Product Introduction: Paste the cut sample on the test fixture of the portable MARK-II anti-slip testing machine, put down the weight of the rotat... |
Same products
 |
Common Rail Injector Valve F00R J02 012 | 卖方: 868983 | Common Rail Injector Valve F00R J02 012 David Chen |
 |
Common Rail Injector Valve F00R J02 005 | 卖方: 868983 | Common Rail Injector Valve F00R J02 005 David Chen |
 |
Common Rail Injector Valve F00R J01 945 | 卖方: 868983 | Common Rail Injector Valve F00R J01 945 David Chen |
 |
Common Rail Injector Valve F00R J01 941 | 卖方: 868983 | Common Rail Injector Valve F00R J01 941 David Chen |
 |
Common Rail Injector Valve F00R J01 924 | 卖方: 868983 | Common Rail Injector Valve F00R J01 924 David Chen |
