seat foam compression hardness tester-QINSUN

Applicable standards:

GB/T 6670-2008"Determination of falling ball resilience of soft foam polymeric materials" : This standard specifies the test method of falling ball resilience of soft foam polymeric materials, which is suitable for the resilience test of car seat foam.

ASTM D3574Standard Test Methods for Flexible Cellular Materials - Slab, Bonded, and Molded Urethane Foams: This is an American Society for Materials and Testing (ASTM) standard that covers a variety of test methods for flexible honeycomb materials (including polyurethane foam)， including tensile, compression and other performance tests, which are applicable to the relevant performance tests of automotive seat foam.

Main parameters:

Test type:Depending on the characteristics of the foam material and test needs, the tester may have a variety of test types such as tensile, compression, rebound, and collapsible hardness.

Test range:The test range of the tester should cover the common performance parameters of the car seat foam material, such as tensile strength, elongation at break, compression deformation, resilience, compressive hardness, etc.

Accuracy and resolution:The accuracy and resolution of the tester determine the accuracy and reliability of the test results. In general, the tester should have a high accuracy and resolution to ensure the accuracy of the test results.

Sample size:The tester usually has certain requirements for the size of the sample, such as the tensile sample may need to be stamped with a specific die, and the compression and rebound sample may need to have a specific size and shape. Therefore, when choosing a tester, it is necessary to ensure that it can adapt to the required sample size.

Test speed:The test speed refers to the rate at which the tester applies a load or displacement during the test. Different test types may require different test speeds. The tester should have an adjustable test speed to meet different test requirements.

Data acquisition and processing:The tester should be equipped with an advanced data acquisition and processing system, which can record the data during the test in real time, and conduct subsequent processing and analysis. This helps the user to understand the performance characteristics of the foam material more accurately.

Safety performance:The tester should have perfect safety protection measures, such as overload protection, emergency stop button, etc., to ensure the safety and reliability of the test process.

Standard :

ISO 3385, ASTM D 3574

parameter：

Control and display	Computer
Sensor	Load cell
Capacity	200KG
Unit	Kg, N, LB
Up plate	Diameter 200mm, bottom fillet R1mm
Low plate	400×400mm, holes diameter 6mm, space 20mm
Max stroke	500mm
Test speed	0～500mm/min
Motor	Servo motor
Driver	Taiwan high precision ball screw
Power	Single phase, 220V, 50Hz
MachineWeight	160KG
Dimension	790×590×1010mm
Accessories	One computer with software

Qinsun Instruments Co., LTD is a professional laboratory testing instrument manufacturer in China,Have been focusing on laboratory instrument R&D more than 30 years and have rich industry experience,Based on international testing standards,We are also the instrument supplier for BV SGS laboratory,We provide one-stop solutions for lab instruments,Free Training and Turn-Key Service,Products exported all over the world,Offer 36 month warranty and are a trustworthy partner.

Other supplier products

	Gravel Resistant Impact Tester/Stone chip tester	Standards ASTM D3170: Coating resistance to gravel impingement. ISO 20567: Paints and varnishes – Resistance to stone chipping. SAE J400...
	Shoe Abrasion Tester	Product Introduction: The whole shoe wear testing machine is used to test the wear resistance of soles and sole pieces. The principle is to press ...
	3D Rotary Cleaning Nozzle	It can be used for cleaning of various reactor kettle, tanks, tank trucks as well as the interial walls of various large containers. Features: 1....
	CIP rotary spray ball, tank cleaning spray balls	CIP rotary spray ball, tank cleaning spray ball Model: STD seriescip rotary spray balls Material: 316L ss Connection: BSPP, sli...
	Wire Cut - through Tester for Ford Automotive Wires	Applicable Standard: Engineering Specification - Ford Global Wire specification, PART NO. ES - AU5T - 1A348 - AA Technical Parameters: 1. Sensin...

供应产品

Same products

	Blanket Flammability Test Machine	卖方: Standard Groups	Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ...
	High Temperature Oxygen Index Tester	卖方: Standard Groups	The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125...
	Limiting Oxygen Index Tester	卖方: Standard Groups	The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb...
	Vertical Flammability Tester	卖方: Standard Groups	Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe...
	45 Degree Flammability Tester	卖方: Standard Groups	Application 45 Degree Flammability Tester is used to determine the burning characteristics of te...