Seat Bumping and Creep Test Bench
This test bench is used for simulating the car seat bumping and creep situation when a car is running. This instrument can perform car seat bumping and creep durability test. The test result directly reflects the service life and safety coefficient of car seat under the condition of bumping and creep. The instrument is also can be used for testing the vibration isolation performance of car seat.
![image.png]( "image.png")
Standards
Seat Bumping and Creep Test Benchis used for simulating the car seat bumping and creep situation when a car is running. This instrument can perform car seat bumping and creep durability test. The test result directly reflects the service life and safety coefficient of car seat under the condition of bumping and creep.
Feature
·Hydraulic and electrical servo technology is used in this test bed to realize the vibration test of single seat and twin seat.
·It is able to realize up the and down bumpy movement of car seat, back and forth movement of the butt model and back model and the twist movement of the butt model and back model. It can perform any type of the three movements, any two types of the three movements or the three movements at the same time.
·The amplitude and frequency of all movements can be adjustable steplessly.
·The test bed can also measure the height of the seat cushion before and after the test.
Technical Parameters
| Items |
Parameters |
| Control system parameters |
Up and down max. amplitude and frequency value |
Amplitude ±20mm, frequency 1.5Hz; Amplitude ±5mm, frequency 7.5Hz |
| Horizontal max. amplitude and frequency value |
Amplitude ±50mm, frequency 0.5Hz |
| Rotatory max. amplitude and frequency value |
Amplitude ±30º, frequency 15cpm |
| Vertical movement hydraulic cylinder |
Up and down displacement stroke |
±50mm |
| Measurement accuracy |
±1% |
| Value resolution |
0.001mm |
| Horizontal movement |
Horizontal displacement stroke |
±75mm |
| Measurement accuracy |
±1% |
| Value resolution |
0.001mm |
| Rotatory movement |
Control accuracy |
±1% |
|
Rotation frequency |
30cpm |
| Acceleration sensor |
Max. acceleration |
50g |
|
Measurement accuracy |
±1.5% |
| Angel range |
±30º , measurement accuracy: ±1%. The Angle value resolution ,0.03º |
| System maximum bearing load |
500kg
|
Qinsun Instruments Co., LTD is a professional laboratory testing instrument manufacturer in China,Have been focusing on laboratory instrument R&D more than 30 years and have rich industry experience,Based on international testing standards,We are also the instrument supplier for BV SGS laboratory,We provide one-stop solutions for lab instruments,Free Training and Turn-Key Service,Products exported all over the world,Offer 36 month warranty and are a trustworthy partner.
Other supplier products
|
|
Textile material feel style evaluation instrument |
Standards
T/CTES 1017-2019
FZ/T 01171-2023
Instrument Features
The testing system adopts a biomimetic design, simulating the mechanical tacti... |
|
|
Film impact tester |
Product Introduction
The film impact testing machine, through the hemispherical punch at a certain speed, impacts and passes through the film samp... |
|
|
Thermal Elongation Tester |
Standard
IEC 60811-1-1: Electric cables – Thermal elongation tests for insulations and sheaths.
ASTM D638: Standard test method for ten... |
|
|
Glow wire tester |
F242 Glow-wire tester, By simulating the thermal stress caused by heat source or ignition source such as hot component or overload resistor in a sh... |
|
|
Automobile seat belt fixed point test bench |
Applicable standards:
National mandatory standards:
GB 15083-2006"Automobile seats, seat fixtures and headrests strength requirements and test me... |
供应产品
Same products
