Electronic single fiber strength meter
Compliance Standards
- GB/T14337
- GB/T9997
- GB/T13835.5
- GB/T21120
- ISO5079
- ISO11566
- ASTM D3822
- BS4029
Application Scope
- Used for determining the following properties of various single fibers:
- Breaking strength
- Initial modulus
- Elongation at break
- Load at a specified elongation
- Elongation at a specified load
- Creep
Instrument Features
1. Microcomputer-controlled with online communication support.
2. High-precision, high-speed force measurement system for accurate test data.
3. Patented pneumatic clamps with constant clamping force to ensure full contact between the clamp faces, preventing sample damage or slippage during experiments.
4. Low-noise and stable drive system composed of high-precision ball screws and high-performance stepper motors from internationally renowned brands.
5. Direct connection to a computer via a high-speed USB port, providing detailed historical test data, reports, graphics, and database establishment capabilities.
6. Large-screen LCD with Chinese menu display for intelligent interface and human-machine interaction, with a printer outputting Chinese reports and curve graphics.
7. Capable of storing 300 test data sets with power-off memory function.
8. LED lighting in the operating area with soft light for convenient sample handling and testing.
Technical Parameters
| Parameter | Specification |
|---|---|
| Mode | Constant rate of elongation (CRE) |
| Clamping Method | Pneumatic clamping |
| Force Measurement Range | 0~200cN |
| Resolution | 0.01cN |
| Measurement Accuracy | ±0.5% |
| Gauge Length | 5~60mm (digital setting) |
| Maximum Elongation | 130mm |
| Tensile Speed | 2~100mm/min (digital setting) |
| Test Modes | - Constant speed tensile - Load at a specified elongation - Elongation at a specified load - Creep - Initial modulus |
| Data Output Methods | - LCD Chinese menu display: Displays all set parameters and test values - Printout: Test reports and tensile curve graphics (computer required) |
| Printer Configuration | 24-pin dot-matrix printer |
| Power Supply | AC220V±10%, 50W |
| Dimensions | H450×W510×D580mm |
在线联系供应商
Other supplier products
 |
Dry Cleaning & Washing Cylinder | Introduction The dry cleaning and washing cylinder consists of a stainless steel rotary test chamber and a multi-speed drive with a digital timer.... |
 |
Taber Abrasion Resistance Tester | Taber Abrasion Tester is also referred to as Taber abraser or Taber abrader, which is used to evaluate the wear resistance of materials or finished... |
 |
PLC liquid crystal touch impact testing machine (simple suspension) | Product Introduction: Liquid crystal touch impact testing machine is mainly used for hard plastics (including sheet, pipe, plastic profile)， reinf... |
 |
Digital Auto Burst Strength Tester | Digital Auto Burst Strength Tester Standards ASTM D3786. ERT 80-4-20. GB/T 7742.1. BS EN ISO 13938-1. BS 3424-6-B, ISO 3303-B, ISO 2758. ISO 3303... |
 |
Dry Cleaning & Washing Cylinder | Introduction The dry cleaning and washing cylinder consists of a stainless steel rotary test chamber and a multi-speed drive with a digital timer.... |
Same products
 |
MMA-120 Handheld Arc Welder | 卖方: 871183 | The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con... |
 |
SHX Series Circulating Fluidized Bed Steam Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi... |
 |
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ... |
 |
DHL Series Coal-Fired Steam Boilers | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b... |
 |
SZL Series Biomass Steam Boiler | 卖方: Hebei Genjux Boiler Co.,Ltd | Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi... |
