.

Bally Waterproofness Tester

Bally Waterproofness Tester is to test materials like coated leather, leather dynamic water penetration resistance ability. The material would be partially put in water and the bally water penetration tester would flex the sample in the water under certain speed to simulate material water resistance in daily work.

Principle:

A rectangular test specimen is bent partly round, and secured between, two cylindrical clamps so as to form a trough. The trough is then immersed in water and the clamps oscillate at a constant speed so that the specimen is repeatedly flexed. The time taken for water penetration through the test specimen to occur is recorded. The mass of water absorbed by, and transmitted through, the test specimen can also be measured.

Parameter:

Test quantity:4 sets

Test stroke:2mm, 3mm, 4mm, 6mm (adjustable)

Speed:50 CPM

Counter:LCD, 0 ~ 999,999

Timer:LCD, 1~999hr

Dimension (WxDxH):48 x 60 x 45 cm (18.9” x 23.6” x 17.7”)

Weight:53 kg

Power:1 Phase, 110V/60 HZ or 220V/50 HZ, 2A or others.

Standards:

DIN-53338,

ISO 5403-1 2011,

GB/T 22890-2008,

EN ISO 20344:2002(6.13),

QB/T 4044,

BS EN 13518-2002,

EN 344-1:1992(5.14),

DIN 53338,

ISO 17702-2003,

SATRA TM 171:1995,

GB/T 3903.17-2008


在线联系供应商

至: Standard Groups
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Multi-Functional Scratch Tester | Testing Equipment
Multi-Functional Scratch Tester | Testing Equipment Introduction Multi-Functional Scratch Testeris suitable for a variety of automotive interior materials, such as plastic, rubber, leather, fabric, ...
EN20344 Sole Flexing Tester
EN20344 Sole Flexing Tester Install the sole test piece on the ENFlexingtesting machine, so that the incision falls just above the center of the rotating shaft of the ENFlexin...
Air Intake Filter Performance Test System
Air Intake Filter Performance Test System The Air Intake Filter Test System is designed to evaluate the filtration performance, airflow characteristics, and dust holding capacity of air int...
Electrical bushing flame retardant tester
Electrical bushing flame retardant tester The flame retardant test instrument for electrical bushing is used to measure the flame retardant performance of PVC cold formed insulating electri...
Battery Diaphragm Gas Permeability Tester
Battery Diaphragm Gas Permeability Tester The Battery Diaphragm Gas Permeability Tester is a precision instrument designed to evaluate the gas permeability of battery diaphragms and separat...
供应产品

Same products

Blanket Flammability Test Machine
Blanket Flammability Test Machine 卖方: Standard Groups Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ...
High Temperature Oxygen Index Tester
High Temperature Oxygen Index Tester 卖方: Standard Groups The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125...
Limiting Oxygen Index Tester
Limiting Oxygen Index Tester 卖方: Standard Groups The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb...
Vertical Flammability Tester
Vertical Flammability Tester 卖方: Standard Groups Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe...
45 Degree Flammability Tester
45 Degree Flammability Tester 卖方: Standard Groups Application 45 Degree Flammability Tester is used to determine the burning characteristics of te...