Smoke Density Chamber

Get a quote：

Whats/App: +86 185 0176 3615

Web: qinsun-lab.com

Email: serving@qinsun-lab。com

The main principle is to measure smoke density in a particular space, cable or material produced under specific conditions of combustion or radiation. The smoke will couse the beam attenuate when passes through the smoke, the light transmittance be use to calculate ratio of the optical density and smoke density.

This machineis designed according to ISO5659. IT IS with a conical radiant furnace, heat flux can be up 50 kW / m2. and laterally positioned sample, it also can test the sample mass loss rate.

Standards

• ISO 5659-1: Plastics - smoke - Part 1: Optical Density Test Principle

• ISO 5659-2: Plastics smoke generated -Part 2: single box test to obtain optical density of the material

Structure

1. The tester is consist of cabinet, sample case, the radiation cone, ignition, light and measuring devices and other relevant control device component;

2. The structural design and control design considers the ergonomics; The test box is with full door design approach; lock design for easy one-time close the door; optimize operational processes;

3. The test has fully opened door for easy loading and unloading of samples and cleaning the box;

4. The front door hinge installation with Windows and window has block the activity window opaque visor to prevent light from entering the sealed box;

5. The controller is located in the side of the box, easy to operate. When the door is closed does not affect the view controller;

6. Security flameout board, replace the simple, safer operation;

7. Which provides gas measurement port for gas toxicity test;

8. The test box for easy cleaning and coating chemical resistance;

Combustion system

1. The heating cone: Power 2600W, input temperature range of 0 ~ 1000 ºC, can be stable within ± 2 ºC within 50 minutes, providing irradiance 10KW / m²-50KW / m² of.

2. The use of mass flow controllers and differential pressure sensor can improve the accuracy of piezometers and automatic leak test

3. Ignition with automatic ignition devices; flame length 30mm ± 5mm; in accordance with standards prescribed blue flame with a yellow tip;

Smoke density measuring system

1. Smoke density and temperature are digital display, viewing more convenient, more accurate values

2. Photodetector assembly includes a photomultiplier, amplified filters, shutters, filters, neutral density filter, a lens, an optical window, and other components;

3. The light source is 6.5V incandescent light sources;

4. The installation of optical cartridge box at the top, light accepted as side-on photomultiplier, light transmission rate of 0.001% accuracy can be achieved

5. Achromatic lens

6. Japan imported Photomultiplier tubes

7. High-gain low-noise amplifier control circuit

Other supplier products

	Automatic Hardness and Density Testing Machine	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Automatic Hardness and Density Testing Machine is designed for high-throughput...
	Electric pencil hardness tester	The Electric Pencil Hardness Tester is designed to determine the surface hardness of coating layers applied to finished products by means of a stan...
	Pendulum Impact Testing Machine For Plastic Film	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Pendulum Impact Testing Machine for Plastics and Composite Materials.Pendulum Impa...
	Simulation Test Dummy	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Simulation Test Dummy is a high-fidelity anthropomorphic test device (ATD) spe...
	Reciprocating Wear Tester | Testing Equipment	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com ASTM Standards: Formulated by the American Society for Testing and Materials (ASTM...

供应产品

Same products

	不锈钢焊剂芯焊丝 E308T1-1 E308HT1-1 E308LT1-1 用于304不锈钢焊接的气保焊丝	卖方: 863048	产品描述 不锈钢药芯焊丝 E308T1-1 E308HT1-1 E308LT1-1，FCAW不锈钢焊丝，AWS A5.22药芯焊丝，304不锈钢焊接耗材，低碳不锈钢药芯焊丝，耐高温不锈钢焊丝，...
	E317LT1-1 焊剂芯线 CO2 不锈钢焊剂含量70% 直径1.0/1.2/1.6mm OEM定制 1200℃熔点	卖方: 863048	迅卓不锈钢药心焊丝 E317LT1-1 分类： Сварочная проволока E317LT1-1 с флюсом, нержавеющая сталь, 70% содержан...
	Mini Jewelry Laser Repair System – 60W to 400W Precision Welding	卖方: Beijing JCZ Technology Co., Ltd	The Mini Jewelry Laser Welding Machineis an advanced mini laser welding system engineered for pre...
	Portable Backpack Laser Cleaning Machine – Lightweight, Efficient Rust & Paint Removal	卖方: Beijing JCZ Technology Co., Ltd	TheHCP-M SeriesBackpack Laser Cleaning Machinefeatures a compact pulsed fiber laser system, desig...
	Suitcase Pulsed Laser Cleaning Machine | Ultra-Portable Handheld Fiber Laser Cleaner	卖方: Beijing JCZ Technology Co., Ltd	The Suitcase Pulsed Laser Cleaning Machineis an ultra-portable, high-precision handheld fiber las...