Solar Cell Spread of Flame & Burning Brand Test Machine

This apparatus is based on UL 1730. IEC 61730-2 design and development. Is to simulate real conditions to assess roof and components of fire-resistant performance of the instrument, in A1.82m, b 2.4mandc 3.9m specimens to evaluate A~C level. Also can be used infire-retardantperformance of photovoltaic components used in this test.

Standards:

•UL1730:multifamilyandhotelroomindividualdwellingunitsmokedetectionmonitors:electricsignaldetectionofhousedust;

•UL790:standardmethodoffiretestforroofcoveringmaterials;

•ASTMe108-04:standardmethodoffiretestforroofcoveringmaterials;

• NFPA256:firetestofroofdeck.

• IEC 61730-2Appendixb:firetestsonPVmodules.

Equipmentcharacteristic:

Structuralparts

1. Plywoodroofcoveringmaterials,dimensions:1.300(w)X1.000(d)x120(h),toinstallthetestsample;

2. Non-combustibilitytestBoard,installedattheendoftesting,canstopthetestpanelstempered;

3. Stainless steelfancontrolboard,thetestanglecan beadjusted,size:1.440(l)x940(h)mm;

4. Used to support the testing of the main frame bracket, corrosion-resistant steel, dimensions: 1.020 (l) x 1.000 (d) x 1.473 (h) mm;

5. Non-combustibleplateAssembly,installedinfrontof theframetosimulatetheeavesandcornice,extensionoftheflamefromtheburnertothespecimen,dimensions:330(w)x2.130(d)x584(h)mm;

6.Airflowrateforthetestpanel:19±8km/h(5.5M/sec),andconfiguretheanemometermonitor;

7. Separateventilationpipes,can beextractedfromoutsidethelaboratoryair;

8. Honeycombfilterisinstalledintheair duct,installedgasinletguidevane;

9. Ventilationductsequipped withslopeadjustmentpanelforadjustingtheairflow direction;

10. Ventilation pipes attached to the Guide, can enhance speed to ensure supply test airflow from the outside interference, guide plates made of stainless steel, location does not change with the wind pressure;

11. Duct materials for stainless steel, corrosion-resistant and heat-resistant, size: 2.130 (w) x 762 (h) x 3.000 (l) mm;

12. Fan 220V,50HZ, three-phase power, is equipped with a reverse system can automatically adjust wind speed, minimum flow for 300m3/min;

13. Infinitelyvariable speedinverter,0-100%adjustable;

14. Gas burners (for intermittent Shi Huo, flame spread and flying fire), 1.12m, 60.3mm, moving in the test side has a 12.7mm (w) *0.91m (long) slit;

15.Gasburner can provide a 22.000Btu/min (387kWh), and according to a, b, c three combustion levels, high-precision gas control valve controlling gas flow,

16. Topburnerthermocoupleisinstalled58.7mm,888±cantest28ºC;

17. Automatic ignition system, ensure the security of test performance, ignition electrode 1.8kVp mass flow controller is the minimum pressure according to different standards, control gas flow rates, Class A and B:21.000 ~ 22.000 Btu/min (369 ~ 387 kWh) for 10 minutes, Class C:18.000 ~ 19.000 Btu/min (316 ~ 334 kWh) 4 minutes;

18. Temperature control system-Class A and B:760±28ºC (1400±50ºF)-21.000 ~ 22.000 Btu/min-Class C:704±28 c (1300±50ºF)-18.000 ~ 19.000 Btu/min

19. High precision pressure gauges and pressure regulating valve controls the gas pressure;

1)-Eachtransfertogasintheburnersneedtofollowadifferenttestandcontrolmethods;

2)-LNG:usingMFMcanaccuratelymeasureflow(flowcontrolvalvecontrol);

3)-LPG:airflowrateusingtheinvertersystem:thetestdeckat19±8km/h(5.5M/sec);

20. Metallicmeshsupportmaterials,palletscan berotated,so thatfullcombustionofmaterials;

Other supplier products

	Washer and Dryer - Test Equipment	Scope of Application Used for the drying process in theTextile Testing - Home Laundering and Drying Proceduresstandard and other textile testing e...
	Yarn Length Measurement Meter	The stir yarn spread evenly apply a predetermined tension, according to the pointer, to determine whether the length of the loop skein standard St...
	Five Fingering Scraper - Test Equipment	Standards Chrysler LP-463DD-18-01 Scratch and Mar Resistance of Automotive Plastics Chrysler PF-10938 Scratch and Mar - Resistance of Molded-In-C...
	Skein Length Tester	The Skein Length Tester is a precision instrument designed to measure the length of yarn accurately. It is used for determining yarn linear density...
	Flammability test furnace for building materials	Product Introduction: Touch screen control building materials flammability test furnace adopts stainless steel box, is in the old JCK-2 products b...

供应产品

Same products

	Air Intake Filter Test System	卖方: Standard Groups	The Air Intake Filter Test System is designed for testing industrial air filters and engine air f...
	Mattress Spring Fatigue Tester，ASTM D3574 ，how to test mattress for sagging	卖方: Standard International Group (HK) Limited	The King Size Foam Fatigue Tester is a single-station pneumatic fatigue testing system designed f...
	Mattress Rollator，ASTM F1566 ，Mattress Durability Tester，Mattress Fatigue Tester	卖方: Standard International Group (HK) Limited	The Mattress Rollator is a laboratory durability testing system designed to evaluate the long-ter...
	HD2 Pneumatic Foam Fatigue Tester，ISO 3385，Foam Fatigue Testing Machine	卖方: Standard International Group (HK) Limited	The HD2 Pneumatic Foam Fatigue Tester is a heavy-duty, single-station laboratory testing machine ...
	VW Heel Abrasion Tester，ISO 4649 ，Heel Performance Testing Machine	卖方: Standard International Group (HK) Limited	The VW Heel Abrasion Tester is designed to evaluate the wear resistance of floor covering materia...