Safety Helmet Flammability Tester
Safety hat flame retardant performance tester for safety hat flame retardant performance test, high degree of automation, easy to operate, widely used in safety hat manufacturers, major quality inspection units and construction engineering testing stations.
According to the criteria:
GB/T 2811-2007 "Hard Hat"
GB/T 2812-2006 "Safety Helmet Test Method"
GB/T 38305-2019 "Head Protection Rescue Helmet"
CEISO9001 1S017025
Product Advantages:
Measures Critical Safety Property: Quantifies the flame retardant performance of safety helmets, essential for protecting wearers in environments with fire hazards.
Standard Compliant: Designed to meet relevant national standards (GB/T 2811. GB/T 2812. GB/T 38305) for safety helmet flame resistance testing.
High Automation: Features a high degree of automation, ensuring consistent test execution and ease of use.
Provides Objective Timing: Includes precise timers for measuring afterflame and afterglow times.
Uses Standardized Flame Source: Utilizes a Bunsen burner with specified dimensions and allows the use of standard test gases.
Suitable for Safety Hats/Helmets: Specifically designed for testing head protective equipment.
Widely Used: Adopted by manufacturers and testing/inspection bodies in the safety helmet industry.
Product Features:
Standard Bunsen burner with a specified inner diameter (10mm) to provide the test flame.
Mechanism for positioning the Bunsen burner flame relative to the safety helmet or test specimen according to the standard's requirements.
Igniter timing system to control the duration for which the flame is applied to the specimen, with a wide adjustable range (0-999.9 seconds) and a typical setting (10 seconds).
Follow-on timer system to accurately measure the afterflame time (how long the specimen burns with a flame after the Bunsen burner is removed) and afterglow time (how long the specimen continues to glow without a flame), with a specified accuracy ($pm$0.01 seconds).
Flame length measuring device with a scale (50mm length) to ensure the test flame is set to the correct size.
Capability to use specified gases (methane, propane, butane, LPG) as the fuel for the Bunsen burner, as required by the test standard.
Fixture or system to securely mount the safety helmet or a test specimen cut from the helmet for testing.
High degree of automation for the test procedure, from flame application to timing.
Safety features (implied) for conducting flame tests.
在线联系供应商
Other supplier products
 |
Liquid Sliding Penetration Comprehensive Performance Tester | The G373 Liquid Sliding Penetration Comprehensive Performance Tester is a precision instrument designed to evaluate the liquid penetration properti... |
 |
Xenon Arc Weather Ometer SI4000 | Weather-Ometer and Fade-Ometer tester adopts water-cooled xenon lamp. This instrument using argon arc lamp simulation control ideal natural climate... |
 |
Single Cable Vertical Flame Tester | Single Cable Vertical Flame Tester is used for the vertical flame propagation of a single insulated wire or cable is a bench scale test to determin... |
 |
Gelbo Flex Tester System | Gelbo Flex Tester Systemis a microprocessor controlled system, with a user controllable pre-set method programmed for ASTM F392. This makes theGelb... |
 |
Electronic single fiber strength meter - lab instrument | Compliance Standards - GB/T14337 - GB/T9997 - GB/T13835.5 - GB/T21120 - ISO5079 - ISO11566 - ASTM D3822 - BS4029 Application Scope - Used... |
Same products
 |
Blanket Flammability Test Machine | 卖方: Standard Groups | Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ... |
 |
High Temperature Oxygen Index Tester | 卖方: Standard Groups | The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125... |
 |
Limiting Oxygen Index Tester | 卖方: Standard Groups | The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb... |
 |
Vertical Flammability Tester | 卖方: Standard Groups | Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe... |
 |
45 Degree Flammability Tester | 卖方: Standard Groups | Application 45 Degree Flammability Tester is used to determine the burning characteristics of te... |
