.

Scrub Abrasion Tester

Get a quote:

Whats/App: +86 185 0176 3615

Web: qinsun-lab.com

Email: serving@qinsun-lab。com

T107 Scrubbing Tester, It is suitable for various abrasion and wet scrubbing tests, which is commonly used in scrubbing resistance tests for interior wall paints, floor tiles, shower rooms, and furniture surfaces. Brush, sponge, scouring pad, sandpaper or other methods can be required to test the scrubbing resistance ability of the painted or uncoated surface. The abrasion resistance test can be carried out by adding abrasive or detergent using wet scrubbing method.

1.Under the driving of the motor, the friction head is driven to reciprocate. At the same time, according to different standard test requirements, movement rate and movement stroke of the tester can be well adjusted; Different standards require different friction heads, including polyurethane sponges, pig hair brushes and so on. By replacing the friction head, different forces can be applied.

2.The tester is equipped with two compression pinch cocks for holding the sample. Insert it into the hole at the back end to lift or lower it, when pressed down, it can press the sample that needs to be held, which is convenient and quick to install the samples, and it has good operability.

Standards compliant

JIS L0849-2013 Tests for color fastness to rubbing (type I);

JIS L0849-2013 Tests for color fastness to rubbing (type II);

JIS L1084-2009 Tests for flocking fabric (color fastness);

JIS L0862-1996 Tests for color fastness to rubbing : Organic solvent (type I);

JIS L0862-1996 Tests for color fastness to rubbing : Organic solvent (type II);

JIS P8136 Tests for abrasion resistance :cardboard ;

JIS L1084-2009 Tests for flocking fabric (flocking strength).

Major Features

Quick-change fixture design

The adjustable quick holder can be used to mount test samples of various thicknesses, easy and convenient.

Standard test accessories

The tester can be configured with a variety of standard test suites to meet different test needs while loading different loads.

Stainless steel body

The test board of the device is made of stainless steel, which can resist the corrosion of various liquids, and the appearance of stoving varnish is beautiful and durable.

Flexible and compact design

The flexible and compact design makes this tester easy to assemble, which can be installed and tested from the lab to the production line at anytime and anywhere.


在线联系供应商

至: Standard Groups
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Fire resistance test furnace for building materials | ASTM ISO Testing Machine
Fire resistance test furnace for building materials | ASTM ISO Testing Machine Get a quote: Whats/App: +86 185 0176 3615 Web: qinsun-lab.com DIN 4102-16 describes the uniform procedure for testing building materials in the ...
Air Flow Velocity Distribution Test System | ASTM ISO Testing Machine
Air Flow Velocity Distribution Test System | ASTM ISO Testing Machine Get a quote: Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Test System for the characterisation of the air flow velocity profile of component...
Test System for dusting solar cell modules | Soiling Tester
Test System for dusting solar cell modules | Soiling Tester Get a quote: Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The test system serves laboratory testing according to VDI 3956 (Test method for t...
Reciprocating Wear Tester
Reciprocating Wear Tester Get a quote: Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Standards ASTM F2496: Scratch hardness and adhesion testing for prints/coatings. ...
Xenon Arc Weatherometer| Testing Equipment
Xenon Arc Weatherometer| Testing Equipment Get a quote: Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The xenon arc lamp, which is capable of simulating the whole natural sunlight spec...
供应产品

Same products

不锈钢焊剂芯焊丝 E308T1-1 E308HT1-1 E308LT1-1 用于304不锈钢焊接的气保焊丝
不锈钢焊剂芯焊丝 E308T1-1 E308HT1-1 E308LT1-1 用于304不锈钢焊接的气保焊丝 卖方: 863048 产品描述 不锈钢药芯焊丝 E308T1-1 E308HT1-1 E308LT1-1,FCAW不锈钢焊丝,AWS A5.22药芯焊丝,304不锈钢焊接耗材,低碳不锈钢药芯焊丝,耐高温不锈钢焊丝,...
E317LT1-1 焊剂芯线 CO2 不锈钢焊剂含量70% 直径1.0/1.2/1.6mm OEM定制 1200℃熔点
E317LT1-1 焊剂芯线 CO2 不锈钢焊剂含量70% 直径1.0/1.2/1.6mm OEM定制 1200℃熔点 卖方: 863048 迅卓不锈钢药心焊丝 E317LT1-1 分类: Сварочная проволока E317LT1-1 с флюсом, нержавеющая сталь, 70% содержан...
Mini Jewelry Laser Repair System – 60W to 400W Precision Welding
Mini Jewelry Laser Repair System – 60W to 400W Precision Welding 卖方: Beijing JCZ Technology Co., Ltd The Mini Jewelry Laser Welding Machineis an advanced mini laser welding system engineered for pre...
Portable Backpack Laser Cleaning Machine – Lightweight, Efficient Rust & Paint Removal
Portable Backpack Laser Cleaning Machine – Lightweight, Efficient Rust & Paint Removal 卖方: Beijing JCZ Technology Co., Ltd TheHCP-M SeriesBackpack Laser Cleaning Machinefeatures a compact pulsed fiber laser system, desig...
Suitcase Pulsed Laser Cleaning Machine | Ultra-Portable Handheld Fiber Laser Cleaner
Suitcase Pulsed Laser Cleaning Machine | Ultra-Portable Handheld Fiber Laser Cleaner 卖方: Beijing JCZ Technology Co., Ltd The Suitcase Pulsed Laser Cleaning Machineis an ultra-portable, high-precision handheld fiber las...