Mattress Rollator

The mattress roller is tested by rolling a 240-pound hexagonal roller 100.000 times (200.000 cycles) across the width of the mattress, equivalent to approximately 10 years of use.

This roller is suitable for mattresses of all sizes, from single to king-size. The PLC-based control system is easy to operate. Simply input the number of test cycles, and the machine will automatically stop after the test. In the event of a power outage, the hexagonal roller will automatically retract from the test surface, and the completed test cycles will be stored for restarting the test upon power restoration.

Standards:

Complies with ASTM F1566. Sections 6 (Hardness Rating) and 7 (Durability Testing).

Features:

1. Rugged and durable 240-pound hexagonal hardwood roller assembly mounted on precision ball bearings.
2. The roller assembly is laterally balanced.
3. The lateral position of the roller assembly is mechanically adjustable.
4. The roller assembly floats freely vertically, unaffected by cylinder hysteresis, thus conforming to the mattress's natural structure.
5. The roller assembly floats freely laterally (and can tilt freely when necessary, just like a human, thanks to the mattress's natural structure).
6. For maintenance, the roller assembly (weighing 240 lbs) can be easily removed by simply unscrewing the two bolt caps at the bottom of each end. The motorized lift has sufficient vertical travel to allow it to be placed directly on a skid for removal.
7. The roller assembly includes a metal deflector to dissipate excess static electricity.
8. Adjustable dual-axis/four-corner support platforms are suitable for mattresses ranging from children's to king sizes;
9. Manual adjustment is simple to operate. All tightening operations are performed via levers, requiring no tools.
10. The corner adjustment crossbar includes a horizontal axis and a double rack and pinion mechanism mounted under the platform to prevent "drawer-like" jamming during adjustment. No straps are required.
11. The top gantry is equipped with a battery-powered lift that automatically raises the roller assembly when testing is stopped (whether at the end of the test or due to a power outage). (The machine will not automatically restart after a power outage.) Please note that the lifting mechanism will operate without power to preserve accumulated test sequences.
12. If the test sample becomes excessively worn, the roller assembly will automatically descend.
13. If excessive wear occurs, the lower limit switch will halt operation.
14. Variable speed motor control allows for easy adjustment of the cycle rate, up to 20 cycles/minute (depending on stroke), and control of the total test time.
15. The roller assembly stroke is programmable but always starts from one end.
16. Sealed polyurethane wheels and stainless steel tracks extend service life without lubrication (and prevent smudging). This also helps reduce operating noise.
17. Center-mounted synchronous belt main drive system. Trapezoidal motion ensures even acceleration and deceleration of the rollers.
18. Independent floor-standing control panel with touchscreen display, including: mattress size selection, running speed, cycle counter, start, stop, and jog control.
19. An emergency stop button is located on the main control panel. The motor uses a mechanical brake when the emergency stop button is activated or during a power outage.

Other supplier products

	Rain Tester - Test Equipment	Standard AATCC 35: Water Resistance: Rain Test for Fabrics BS EN ISO 22958: Textiles – Determination of Resistance to Water Penetration &nd...
	High-efficiency Filter Test Bench	The high-efficiency filter scanning test bench can test the efficiency and resistance of filters under the rated air volume conditions. The fundame...
	Xenon Arc Weather Ometer SI4000	Introduction： SI4000Xenon Arc Weather Ometer utilizes a xenon lamp to simulate ideal natural climate and sunlight conditions. It is suitable for s...
	AATCC KMS-M6 Washer, KMS-M6D Dryer - lab instrument	TheAATCC KMS-M6 Washer & KMS-M6D Dryerare precision textile testing instruments designed to evaluate fabric durability, colorfastness, and dime...
	dynamic fatigue testing machine	Theseam fatigue testeris designed to evaluate the fatigue resistance of seam on the material which is applied on the surface of automotive seat.The...

供应产品

Same products

	Blanket Flammability Test Machine	卖方: Standard Groups	Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ...
	High Temperature Oxygen Index Tester	卖方: Standard Groups	The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125...
	Limiting Oxygen Index Tester	卖方: Standard Groups	The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb...
	Vertical Flammability Tester	卖方: Standard Groups	Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe...
	45 Degree Flammability Tester	卖方: Standard Groups	Application 45 Degree Flammability Tester is used to determine the burning characteristics of te...