Reciprocating Wear Tester
Standards
ASTM Standards: Formulated by the American Society for Testing and Materials (ASTM), standards such as ASTM D6079 are used to evaluate the friction coefficient and anti - wear properties of lubricating oils. ISO Standards: Standards like ISO 12156 established by the International Organization for Standardization (ISO) are also applicable to these tests. National Standards: In China, the tests may need to comply with the GB/T series of national standards, which have detailed provisions on testing methods, conditions, data processing, etc. Industry Standards: Depending on specific application fields and testing requirements, certain industry - specific standards are also involved. These standards are developed according to the testing requirements for specific materials or application areas.
Research
Research the friction and wear properties of various materials, including metals, non - metals, and composite materials. Provide support for material improvement and optimization based on test data, and drive the research and development of new materials.
Applications
Evaluate the wear resistance of key mechanical components such as engine pistons, gears, and bearings. Predict their service life and performance in actual use, assist in optimizing mechanical designs, and enhance product reliability and durability.
Aerospace Field
Study the wear resistance of spacecraft materials, simulate friction conditions in extreme environments, assess the abrasion - resistance ability of materials, and ensure the reliability and safety of spacecraft.
Automotive Manufacturing Industry
Test the wear resistance of automotive components like brake pads, tires, and engine parts. Evaluate their wear - resistance and durability in practical use to improve the quality and performance of automotive products.
Applications in Other Industries
In industries such as coatings, plastics, decorative fabrics, automotive interiors, and tufted fabrics, detect the scratch - resistance and wear - resistance properties of materials, providing support for product quality control and performance enhancement.
Technical Parameters
The biggest test (kN) : 10
Test force measuring range: the maximum test force of 0.06% 100%
Test force relative error value: plus or minus 1%, under 400 n + / - 5 n
Test force long stay: of error of plus or minus 1% FN (per)
The friction measurement range (N) : 0-300
Single-stage infinitely variable speed system (r/min) : 200 ~ 3000
Spindle speed error (r/min) : 10 mm
The friction load sensor (N) : 50
The oil box of stroke (mm) : > 45
The spindle hole taper: 1:7
The heater temperature scope of work (℃) : at room temperature to 220
The temperature control range (℃) : 2 or less
Special standard ball diameter (12.7 mm:) phi
The spindle motor power (kW) : 2.2
Machine spindle control: time control speed (cycle) friction control
Machine appearance size (mm) : 1200 * 810 * 810
Testing machine quality (kg) : 850
在线联系供应商
Other supplier products
 |
Fabric vertical flammability tester | Fabric vertical flammability testerApplications: VTEC Vertical Flammability Chamber for measuring the vertical flame spread for childrens’... |
 |
Xenon Light Fastness Test Chamber | Features and Benefits 1.Full-Spectrum Xenon Lamp Xenon arc lamps emit a continuous spectrum from UV to visible and infrared, closely simulating n... |
 |
Leather Shoe Hook Core Longitudinal Bending Stiffness Tester | The Leather Shoe Hook Core Longitudinal Bending Stiffness Tester is designed to measure the longitudinal bending stiffness of steel shanks used in ... |
 |
Glow Wire Test Apparatus | Application:Glow wire testeris suitable for lighting equipment, low-voltage electrical appliances, electrical instruments, and other electrical and... |
 |
Rain Tester | Standard AATCC 35: Water Resistance: Rain Test for Fabrics BS EN ISO 22958: Textiles – Determination of Resistance to Water Penetration &nd... |
Same products
 |
Air Intake Filter Test System | 卖方: Standard Groups | The Air Intake Filter Test System is designed for testing industrial air filters and engine air f... |
 |
Mattress Spring Fatigue Tester，ASTM D3574 ，how to test mattress for sagging | 卖方: Standard International Group (HK) Limited | The King Size Foam Fatigue Tester is a single-station pneumatic fatigue testing system designed f... |
 |
Mattress Rollator，ASTM F1566 ，Mattress Durability Tester，Mattress Fatigue Tester | 卖方: Standard International Group (HK) Limited | The Mattress Rollator is a laboratory durability testing system designed to evaluate the long-ter... |
 |
HD2 Pneumatic Foam Fatigue Tester，ISO 3385，Foam Fatigue Testing Machine | 卖方: Standard International Group (HK) Limited | The HD2 Pneumatic Foam Fatigue Tester is a heavy-duty, single-station laboratory testing machine ... |
 |
VW Heel Abrasion Tester，ISO 4649 ，Heel Performance Testing Machine | 卖方: Standard International Group (HK) Limited | The VW Heel Abrasion Tester is designed to evaluate the wear resistance of floor covering materia... |
