Oil-Water Separation Tester - Test Equipment
Many materials and components in various industries are subjected to repeated cycles of operation, stress, or exposure. Evaluating their performance and durability requires testing methods that go beyond single-event or static measurements. "Multiple Passes Through Tester" refers to systems designed to replicate these repetitive actions in a controlled laboratory environment.
The fundamental principle involves setting up a test where the item under evaluation undergoes a specific interaction or process, and this process is then repeated for a large number of cycles or "passes." The test aims to accelerate the effects of long-term use, allowing manufacturers and researchers to assess degradation, wear, fatigue, or the ability to maintain performance over time.
Examples of testers that utilize the "multiple passes through" principle include:
Hydraulic Filter Multi-pass Testers: Hydraulic fluid containing contaminant is repeatedly circulated through a filter element to measure its particle removal efficiency and dirt holding capacity over time.
Zipper Fatigue Testers: The zipper slider is repeatedly opened and closed along the zipper chain to assess its durability and functional life.
Hook and Loop Fastener Fatigue Testers: Hook and loop tapes are repeatedly engaged and disengaged to evaluate the degradation of closure strength.
Shoe Bending Testers: Complete shoes or shoe components are repeatedly flexed to assess their resistance to bending fatigue.
Flow Fatigue Testers (e.g., for filters): Components are subjected to repeated cycles of pressure or flow to evaluate structural fatigue.
In these testers, the number of cycles or passes is carefully controlled and monitored. Performance parameters are measured at intervals or at the end of the test, and failure criteria are typically defined based on changes in performance, appearance, or structural integrity.
Meet the standard
ISO 16889
ASTM D5170
ASTM D2060
ASTM F3445
ISO 3724
ISO/DIS 19438-2004
ISO 4548-12:2000
GB/T 18853-2015
GB/T 8243.12-2007
Product Advantages
Simulates the effects of long-term, repetitive use in an accelerated laboratory setting.
Provides objective data on durability, fatigue, and wear.
Essential for predicting service life and ensuring product reliability.
Allows for controlled evaluation of performance degradation over time.
Supports research and development of more robust and long-lasting products.
Standard compliant test methods are available for many applications of this principle.
Technical Parameters
Flow Range: Qv 5 L/min to 30 L/min
Pressure Drop Range: 0 to 500 kPa and 0 to 1 MPa (High Pressure Drop Resistance)
Media Temperature: Room Temperature to 90°C
Differential Pressure Measurement Range: 0 to 500 kPa
Test Dust: SOFTC-2A
Test Oil Tank Capacity: 30L
Test Oil Tank Capacity: 10L
Adding Ash Rate: 0.06*Qv g/h (0.3 to 1.8 g/h)
在线联系供应商
Other supplier products
 |
Syringe needle flow tester | The Syringe Needle Flow Tester is designed to evaluate the flow characteristics of syringes by measuring the volume of liquid discharged over a spe... |
 |
Car seat center of gravity measuring tester | 1. Product Overview The Car Seat Center of Gravity Measuring Tester is a precision testing system designed to accurately determine the center of g... |
 |
Tumble dryer | The Tumble Dryer is designed for textile testing applications, specifically for home laundering and drying procedures. It provides a controlled dry... |
 |
Motorized Notching Machine | The Motorized Notching Machine is designed to prepare standardized notched specimens for impact testing of rigid plastics and other non-metallic ma... |
 |
Liquid Sliding Penetration Comprehensive Performance Tester | The G373 Liquid Sliding Penetration Comprehensive Performance Tester is a precision instrument designed to evaluate the liquid penetration properti... |
Same products
 |
Air Intake Filter Test System | 卖方: Standard Groups | The Air Intake Filter Test System is designed for testing industrial air filters and engine air f... |
 |
Mattress Spring Fatigue Tester，ASTM D3574 ，how to test mattress for sagging | 卖方: Standard International Group (HK) Limited | The King Size Foam Fatigue Tester is a single-station pneumatic fatigue testing system designed f... |
 |
Mattress Rollator，ASTM F1566 ，Mattress Durability Tester，Mattress Fatigue Tester | 卖方: Standard International Group (HK) Limited | The Mattress Rollator is a laboratory durability testing system designed to evaluate the long-ter... |
 |
HD2 Pneumatic Foam Fatigue Tester，ISO 3385，Foam Fatigue Testing Machine | 卖方: Standard International Group (HK) Limited | The HD2 Pneumatic Foam Fatigue Tester is a heavy-duty, single-station laboratory testing machine ... |
 |
VW Heel Abrasion Tester，ISO 4649 ，Heel Performance Testing Machine | 卖方: Standard International Group (HK) Limited | The VW Heel Abrasion Tester is designed to evaluate the wear resistance of floor covering materia... |
