Textile Flatness Tester - Test Equipment
TheTextile Flatness Testeris a precision instrument designed to evaluate fabric surface evenness by quantifying thickness variation, weave irregularities, and fiber distribution. It ensures compliance with quality standards for garment manufacturing, upholstery, and industrial textiles.
Type: Non-contact optical scanning system
Measurement Parameters:
Thickness variation (μm)
Surface roughness (Ra)
Weave flatness index (FI)
Sample Size: Up to 1000×1000mm (adjustable)
Applications: Knitted fabrics, woven textiles, technical textiles
Compliance Standards
ISO 9073-4 (Textile flatness measurement)
ASTM D3884 (Abrasion resistance correlation)
AATCC 124 (Appearance after repeated home laundering)
GB/T 3917.2 (Chinese fabric evenness standard)
Key Features
Multi-Layer Analysis:
Surface Layer:Detects yarn unevenness
Mid-Layer:Measures fabric density
Base Layer:Identifies substrate irregularities
Advanced Features:
AI defect classification (32+ pattern types)
Real-time thickness deviation alerts
Batch comparison with historical data
Calibration System:
NIST-traceable reference plates
Auto-zero compensation
Environmental drift correction
Applications
Quality Control:Pre-shipment fabric inspection
R&D:Developing wrinkle-resistant fabrics
Forensic Analysis:Evaluating wear patterns
Textile Education:Training on fabric defects
Standard Operation Workflow:
Sample Mounting: Clamp fabric on vacuum table
Parameter Setup: Select test mode (static/dynamic)
Scanning: Full-area 3D mapping (5-20min)
Analysis: Generate defect density heatmaps
Reporting: Export PDF/A4 compliance reports
Safety Precautions
Avoid direct eye exposure to RGB LEDs
Use anti-static mat for synthetic fabrics
Maintain 50cm clearance from moving parts
Technical Specifications
| Parameter | Specifications |
|---|---|
| Scanning Resolution | 0.1mm x 0.1mm grid mapping |
| Thickness Measurement Range | 0.05-10mm (±0.5% accuracy) |
| Surface Roughness Detection | 0.1-100μm Ra (ISO 4287 standard) |
| Light Source | 400-700nm RGB LED array |
| Data Output | 3D topography map + statistical CSV |
| Dimensions | 1500×800×1200mm (L×W×H) |
在线联系供应商
Other supplier products
 |
Next Generation Impactor(NGI) | The next generation impactorTM, or NGITM, is a high performance cascade impactor for classifying aerosol particle into size fractions for testing m... |
 |
Fabric horizontal burning tester | Standard QB/T 2729: Leather – Horizontal flammability test for physical and mechanical properties. ASTM D5132: Horizontal burning rate of p... |
 |
Textile Spray Rating Tester - Test Equipment | The device is a constant temperature and humidity moisture permeability test device, which is suitable for sportswear and other requirements of the... |
 |
QM Contact Coolness Tester | It is used to measure and evaluate the contact coolness index "q max" (peak heat flux). When the skin comes into contact with fabrics, different am... |
 |
Fiber Thermal Shrinkage Tester | Thefiber thermal shrinkage testeris lately developed based on the digital technology. It is applied to the dry thermal shrinkage test of staple c... |
Same products
 |
Blanket Flammability Test Machine | 卖方: Standard Groups | Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ... |
 |
High Temperature Oxygen Index Tester | 卖方: Standard Groups | The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125... |
 |
Limiting Oxygen Index Tester | 卖方: Standard Groups | The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb... |
 |
Vertical Flammability Tester | 卖方: Standard Groups | Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe... |
 |
45 Degree Flammability Tester | 卖方: Standard Groups | Application 45 Degree Flammability Tester is used to determine the burning characteristics of te... |
