Textile Far - Infrared Radiation Heating Tester - Test Equipment
With the continuous advancement of technology, new types of fibers and textile products have emerged, leading to increasingly high demands on textile performance. To meet these requirements, various performance tests must be conducted, including far-infrared emissivity testing. This document introduces the principles, applications, and compliance standards of textile far-infrared emissivity testers.
Compliance Standards
GB/T 30127.4-2013.ISO 18562-3:2017
Testing Principle
The textile far-infrared emissivity tester determines the far-infrared performance of various textile products (including fibers, yarns, fabrics, nonwovens, and their products) through far-infrared emission measurement. The principle involves:
1. Placing a standard blackbody panel and sample on a heating plate sequentially
2. Adjusting the heating plate temperature to specified levels
3. Using a far-infrared radiation measurement system with spectral response coverage of 5μm~14μm to measure the radiant intensity of both the standard blackbody and sample after thermal stabilization
4. Calculating the sample's far-infrared emissivity through the ratio of radiant intensity between sample and standard blackbody
Applications
This tester is widely used in textile quality control for:
- Evaluating far-infrared properties of natural fibers (cotton, wool) and synthetic fibers (polyester, nylon)
- Testing emissivity performance of yarns and fabrics in different textile structures
- Quality assessment of nonwoven materials and finished garments
- Providing data support for product design optimization and production process improvement
Key requirements include:
- Test temperature range: 25°C~45°C
- Spectral measurement range: 5μm~14μm
- Use of certified standard blackbody panels
- Temperature control precision: ±0.5°C
- Emissivity calculation method: Radiant intensity ratio between sample and reference
在线联系供应商
Other supplier products
 |
Desktop Xenon lamp aging test chamber | TheXenon lamp aging test chamberis a photoaging tester for large-capacity textile testing. With additional sample light frame, temperature sensor a... |
 |
Schopper Abrasion Tester - Test Equipment | Standards DIN 53863. Part 2: Abrasion test methods for textile fabrics (rotary abrasion test). GME Standard 60345 & GMW Standard 3283: Indust... |
 |
Building material flame retardancy test furnace | Technical parameters: Gas used: methane flow rate （35 ± 0.5）L/min, its purity is greater than 95%, air flow rate （17±0.2）L/min Spec... |
 |
Air-cooled Xenon Lamp Aging Tester - Test Equipment | A Light Fastness Tester, or Xenon Tester, Accelerated Ageing Chamber, is used for xenon arc testing in dye fastness tests for lightfastness and wea... |
 |
Wool Fineness Analyzer | The Wool Fineness Analyzer measures wool fiber fineness using the airflow method. By forcing air through a measured mass of wool under controlled p... |
Same products
 |
Blanket Flammability Test Machine | 卖方: Standard Groups | Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ... |
 |
High Temperature Oxygen Index Tester | 卖方: Standard Groups | The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125... |
 |
Limiting Oxygen Index Tester | 卖方: Standard Groups | The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb... |
 |
Vertical Flammability Tester | 卖方: Standard Groups | Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe... |
 |
45 Degree Flammability Tester | 卖方: Standard Groups | Application 45 Degree Flammability Tester is used to determine the burning characteristics of te... |
