Syringe needle flow tester
Get a quote：
Whats/App: +86 185 0176 3615
Web: qinsun-lab.com
The Syringe Needle Flow Tester is designed to evaluate the flow characteristics of syringes by measuring the volume of liquid discharged over a specified time. It provides accurate and reproducible results for quality control, research, and development of syringes, anesthetic puncture kits, and pre-filled injection systems. The device integrates a test body, syringe fixture, flow meter, and control system for precise testing.
Application
This tester is suitable for a wide range of medical devices, including:
(1) Disposable anesthetic syringes – testing flow rate consistency for anesthesia delivery.
(2) Pre-filled syringes – ensuring accurate dosing and uniform liquid discharge.
(3) Standard hypodermic syringes – assessing flow characteristics for various liquid viscosities.
(4) Infusion needles – evaluating needle performance under different pressures.
(5) Catheter-mounted syringes – verifying flow rate for precise medical application.
(6) R&D and production line quality control – confirming syringe compliance with standards.
Standards
The instrument is designed to meet the following standards:
(1) YY 0321.1: Disposable anesthetic puncture kit (China)
(2) YYB: Stainless steel injection needle for pre-filled and sealed syringes (China)
Optional compliance with international standards:
(3) ISO 7886-1: Sterile hypodermic syringes – Part 1
(4) ISO 8537: Single-use sterile needles and syringes
Features
(1) Measures syringe flow rate accurately over a fixed time interval.
(2) Integrated control system for precise pressure and flow management.
(3) Supports different syringe sizes with customizable fixing fixtures.
(4) Real-time monitoring of test parameters, ensuring reliable results.
(5) Easy-to-use interface for rapid setup and operation.
(6) Compact design suitable for laboratory or production environments.
Parameters
| Parameter | Specification |
|---|---|
| Test pressure | 0 – 400 kPa |
| Pressure resolution | 0.1 kPa |
| Pressure accuracy | ±1% FS |
| Air source interface | 8 mm polyurethane pipe |
| Test interface | 6% Ruhr connector (customizable) |
| Host dimensions (L × W × H) | 325 × 420 × 170 mm |
在线联系供应商
Other supplier products
 |
Flatbed Ironing Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Flatbed Ironing Tester is a laboratory-grade instrument designed to simulate r... |
 |
Seatbelt Fabric Pilling Tester | The Seatbelt Fabric Pilling Tester is designed to simulate the pilling and wear of garments caused by seatbelt friction. It is suitable for testing... |
 |
UV proof tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Email: serving@qinsun-lab。com It includes the closest spectral characteristics of... |
 |
Reciprocating Abraser | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Email: serving@qinsun-lab。com Fixed sample on a horizontal table, wearing it unde... |
 |
Filter Flow Resistance Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Filter Flow Resistance Tester operates by circulating a test fluid (such as hy... |
Same products
 |
Tabletop Xenon Arc Weathering Tester (SunMaster) | 卖方: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Water-Cooled Xenon Lamp Weat... |
 |
Blow-By Test Rig | 卖方: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Test system for the characterisa... |
 |
Air filter System（ISO 16890/EN 779） | 卖方: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Filter test system for general a... |
 |
Oil Thread Leak Test System | 卖方: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Test System for oil thread leak ... |
 |
Manual HEPA/ULPA Filter Scanning Test System | 卖方: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Manual HEPA/ULPA Filter Scan... |
