Smoke Density Tester
Application
Smoke density meters are widely used in various industries, including but not limited to the following:
Building Materials: Evaluating the combustion performance of building materials to provide a reference for building design and material selection.
Plastics and Textiles: Testing the smoke density produced by these materials during combustion to ensure they meet safety standards.
Fire Safety: Testing the smoke release characteristics of materials by simulating fire environments to provide data support for the fire safety design of buildings.
Environmental Protection: Evaluating the smoke emissions of materials during combustion to ensure they comply with environmental regulations.
Standards
ASTM E662:Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM F814:Test Method for Specific Optical Density of Smoke Generated by Solid Materials for Aerospace Applications
NFPA 258:Research Test Methods for Determining Smoke Generation of Solid Materials
Boeing BSS 7238:Test Method for Smoke Generation by Materials on Combustion
FAR Part 25 Appendix F Part V:Test Method To Determine the Smoke Emission Characteristics of Cabin Materials
Aircraft Materials Fire Test Handbook Chapter 6:Chapter 6 of Aircraft Materials Fire Test Handbook
Airbus AITM 2.0007A:Determination of the Specific Optical Smoke Density of Component Parts or Sub-Assemblies of Aircraft Interior
Airbus AITM 2.0007B:Determination of Specific Optical Smoke Density for Wires and Cables in Aircraft
IMO MSC.61 (67) Annex 1 Parts 1&2:Fire Test Procedures for Ship Materials
ISO 5659-2:Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test
IMO FTCP Part 2:Smoke And Toxicity Test
BS 6401:BS 6401 - [Specific Title Related to Smoke Testing](
ABD0031:Airbus Fireworthiness Requirements: Generation of Smoke and Toxic Gases
Features
Durable Teflon-Coated Chamber:
The test chamber is lined with Teflon, providing strong resistance to the corrosive effects of combustion-generated smoke, which significantly extends the lifespan of the equipment.
Clear Visibility Markers:
The bottom of the chamber features an "EXIT" sign in white letters on a red background. This allows test personnel to easily observe the clarity or blurriness of the sample through the transparent observation window.
Precision Light Sensing:
The tester uses an incandescent light source paired with a silicon photodiode as the light sensor, calibrated with cosine corection. Equipped with color filters, it effectively blocks UV and IR light that is not visible to the human eye, ensuring accurate color matching.
High-Pressure Flame Impact:
The main burner applies a flame to the test sample at a pressure of 276 KPA. An auxiliary burner is also included to subject any dripping material to additional flame impact, operating at a gas pressure of 138 KPA to ensure thorough combustion of molten droplets.
Advanced Data Display:
The standard test software provides light transmittance values every 15 seconds, generating a transmittance test curve. After the test, it calculates and displays the SDR (Smoke Density Rating) value, which represents the integral value of the smoke produced.
Comprehensive Test Reporting:
The software can compile and synthesize test reports from three sample groups, creating an SDR smoke density development curve. It also allows simultaneous comparison of SDR values from three tests, automatically determining compliance with testing standards.
User-Friendly Data Management:
Test data can be easily exported to a computer and connected to a printer for convenient report generation and printing, enhancing user accessibility and efficiency.
在线联系供应商
Other supplier products
 |
High-efficiency Filter Test Bench | The High-Efficiency Filter Test Bench is a specialized system designed to evaluate the filtration efficiency and resistance characteristics of HEPA... |
 |
Thermal Protective Performance Tester (TPP) - Test Equipment | The Thermal Protective Performance (TPP) Test Device was developed to measure the time elapsed for convective and radiant heat to penetrate through... |
 |
Seat Belt Abrasion Tester | Standard： ISO 10555(Seat Belt Assemblies - Test Methods for Abrasion Resistance) ECE R16(Uniform Provisions Concerning the Approval of Safety Bel... |
 |
Automatic Cross-Hatch Tester | Standards Automotive Standards: PV 3952. Ford BN 108-03. BMW 0180. DAF KEUR 00824-401. GME 60401. GM 14829. Jaguar-Landrover TPJLR.52.00. GM N 146... |
 |
Taber Abrasion Tester (Double-Head) | Standards DIN Standards: DIN 53754 (plastics), DIN 53109 (paper/board), DIN 52347 (glass/plastics) ASTM Standards: ASTM D1044 (transparent plasti... |
Same products
 |
Blanket Flammability Test Machine | 卖方: Standard Groups | Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ... |
 |
High Temperature Oxygen Index Tester | 卖方: Standard Groups | The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125... |
 |
Limiting Oxygen Index Tester | 卖方: Standard Groups | The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb... |
 |
Vertical Flammability Tester | 卖方: Standard Groups | Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe... |
 |
45 Degree Flammability Tester | 卖方: Standard Groups | Application 45 Degree Flammability Tester is used to determine the burning characteristics of te... |
