Transparent Absorbing Wave Temperature and Humidity Vibration Test Chamber

Applications

The Transparent Absorbing Wave Temperature and Humidity Vibration Test Chamber is a high-end testing device capable of simulating complex environmental conditions. It is particularly well-suited for reliability verification in fields such as aerospace, aviation, and automotive electronics. By superimposing temperature-humidity cycles with vibration stress, it rapidly exposes potential defects in products during transportation or use.

Standards

JJF 1101 Calibration Specification for Temperature and Humidity of Environmental Test Equipment

GB/T 5170 Inspection Methods for Environmental Test Equipment for Electrical and Electronic Products

Parameters

Category	Item	Specifications
Basic Specifications	Nominal Inner Volume	9.5 m³
	Inner Chamber Dimensions	2700mm × 1800mm × 1950mm (Depth × Width × Height)
	Test Environment Conditions	Ambient temperature: 25°C, relative humidity: ≤85% RH, cold water temperature: ≤28°C
Temperature Performance	Temperature Range	-70°C ~ +100°C
	Temperature Fluctuation	≤±0.5°C
	Temperature Deviation	≤±2°C
	Temperature Uniformity	≤2°C
	Temperature Ramp Rate	- Heating: ≥10°C/min (equivalent load 1000kg, electric heating power 8kW, average across the whole range; ≥10°C/min from room temperature to -55°C, ≥10°C/min from -55°C to 70°C)- In the range of -55°C ~ +85°C, the chamber can withstand an internal heat load of 8000W- In the range of -55°C ~ +85°C, the chamber can withstand an internal heat load of 3500W and an internal cooling air supply of 100kg/h (air temperature: 2~35°C, dew point temperature: ≤40°C)
Humidity Performance	Humidity Range	35% RH ~ 98% RH (adjustable within -20°C ~ 70°C)
	Humidification Method	Humidification via hot air passing through the test piece; alternating temperature and humidity (typical value: 30°C/60°C, RH95%, temperature change rate ≥85%); constant temperature and humidity (typical value: 35°C, 90% ~ 98%)
	Humidity Deviation	≤±3% RH (when humidity >75% RH); ≤±5% RH (when humidity ≤75% RH)
Chamber Front Door	Door Configuration	Hermetic door with transparent viewport- Temperature resistance: -65°C ~ +105°C- Humidity resistance: 25% ~ 98% RHFunctional performance:1) Working frequency: X-band2) Temperature resistance range: -65°C ~ +105°C3) Humidity resistance range: 25% ~ 98% RH4) Wave transmission rate: >95%5) Standing wave ratio influence: <2%6) Power resistance: 10W/cm²7) Flatness: <2cm (diagonal), no deformation after fabrication8) Fixing method: High-strength adhesive bonding to the chamber frame
Chamber Front End	Absorber Material (on Hermetic Door)	- Wave transmission rate (X-band): >95% (on left, right, and upper sides)- Power resistance: 10W/cm²- Total mass loss (TWC): ≤0.6%- Volatile condensable material (CVCM): ≤

Other supplier products

	Cantilever Fabric Stiffness Tester	Standard ZB WO4003. GB/T18318. ASTM D 1388. IS09073-7. BS EN22313 Application Fabric Stiffness Tester, is a practical equipment to determine the...
	Fabric Abrasion Tester	For fabric, wear resistance is a important indicator to evaluate its performance and durability properties. In the process, an abrasion material ma...
	Wyzenbeek or Oscillatory Abrasion Tester	Wyzenbeek wear resistance tester, also known as Oscillatory wear resistance tester, is used to test the wear resistance of fabrics against standard...
	Textile formaldehyde content tester - lab instrument	In China, the national mandatory standard "national textile products basic safety technical specifications" GB18401-2003. with effect from 1 Januar...
	Fabric Anti-Electromagnetic Radiation Performance Tester	The Fabric Anti-Electromagnetic Radiation Performance Tester is a precision instrument designed to measure the electromagnetic shielding effectiven...

供应产品

Same products

	Air Intake Filter Test System	卖方: Standard Groups	The Air Intake Filter Test System is designed for testing industrial air filters and engine air f...
	Mattress Spring Fatigue Tester，ASTM D3574 ，how to test mattress for sagging	卖方: Standard International Group (HK) Limited	The King Size Foam Fatigue Tester is a single-station pneumatic fatigue testing system designed f...
	Mattress Rollator，ASTM F1566 ，Mattress Durability Tester，Mattress Fatigue Tester	卖方: Standard International Group (HK) Limited	The Mattress Rollator is a laboratory durability testing system designed to evaluate the long-ter...
	HD2 Pneumatic Foam Fatigue Tester，ISO 3385，Foam Fatigue Testing Machine	卖方: Standard International Group (HK) Limited	The HD2 Pneumatic Foam Fatigue Tester is a heavy-duty, single-station laboratory testing machine ...
	VW Heel Abrasion Tester，ISO 4649 ，Heel Performance Testing Machine	卖方: Standard International Group (HK) Limited	The VW Heel Abrasion Tester is designed to evaluate the wear resistance of floor covering materia...