True Body Weight Ingress Egress Tester，Car seat simulates Ingress/Egress tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The True Body Weight Ingress/Egress Tester is a specialized machine designed to evaluate either a complete automotive seating system or individual seat components. It provides realistic simulation of human ingress and egress movements, including dynamic interaction with seat cushions, upholstery, and the underlying mechanical structure. The tester can even assess the wear and durability of the occupant’s clothing during repeated use.
Application
The simulated human entry/exit seat test bench employs pneumatic servo control to simulate human entry and exit tests for automotive seats, measuring load, displacement, angle, and other parameters.
Standards
SAE J826-2002 – Anthropomorphic Test Devices for Vehicle Seating Systems
QC/T 740-2017 – Automotive Seat Fatigue Test Standard
Industry standards for automotive seat ingress and egress durability
Features
Four servo-electric motor-driven axes and three pneumatic functions for realistic movement.
Simulates in & out, right & left, up & down, rotation, free weight drop & recapture, and independent leg motion.
True body weight simulation (35–100kg) for realistic dynamic loading, including inertia effects.
Concurrent and programmable motion sequences for highly life-like testing.
Evaluates seat cushion, backrest, frame, foam, and fabric durability under repeated entry and exit cycles.
Adjustable test frequency, amplitude, and cycle count with automatic stop at the end of the test.
Parameters
| Parameter | Specification | Notes |
|---|---|---|
| Dummy Model | 3D indenter, 50% SAE J826-2002 | Wrapped with 12mm foam and denim |
| Pressure Head Weight | 44.5 kg | Adjustable for different test scenarios |
| Horizontal Slide | ~25 mm into cushion | Inner rear first with 30° rotation |
| Load on Pressure Head | 445 N | Maintained during creep and exit cycles |
| Rotation Angle | 30° | Simulates realistic entry angle |
| Experimental Frequency | 4.5 cycles/min | Adjustable |
| Number of Experiments | 15.000 simulated ingress/egress cycles | — |
Accessoriess
Pointer glass cover: Typically made of thickened tempered glass or acrylic, providing explosion-proof, scratch-resistant, and impact-resistant properties.
Washer: Located between the bottom of the scale and the platform, serving to absorb shock and stabilize the scale.
Zero-adjustment screw: Allows the pointer to accurately return to zero when unloaded by fine-tuning the balance system.
Weight weight: Used to measure weight.
Hook: Used to secure the weight.
Height ruler: Used to measure height.
Electronic height meter: Used to measure both height and weight.
Test Procedures
Prepare the 3D dummy indenter according to SAE J826-2002 standards. Wrap with foam and denim, and add weight to simulate realistic human mass.
Secure the seat assembly on the test bench and adjust to design position.
Program the robot motion for simulated human entry/exit:
Horizontal slide of pressure head into seat, rotating 30°
Align center line of pressure head with seat center
Creep and stabilize pressure head within the seat
Maintain 445 N load while sinking into seat
Continue creep against backrest at 30°
Maintain 445 N load as pressure head is halfway out
Slide along seat cushion edges during exit, simulating edge indentation
Start the test cycle; machine automatically repeats motions at set frequency.
Stop automatically after 15.000 simulated cycles and inspect seat for damage.
Safety and Maintenance
Ensure proper calibration of servo-electric axes and pneumatic actuators.
Check dummy and pressure head integrity before testing.
Maintain and inspect all mechanical and pneumatic components regularly.
Emergency stop and overload protection are built-in for operator safety.
Clean and lubricate moving parts as per manufacturer instructions.
在线联系供应商
Other supplier products
 |
Photovoltaic Ammonia Test Chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications The Photovoltaic Ammonia Test Chamber is a testing device designed to evaluat... |
 |
Fabric Far Infrared Energy Conversion Pathway Mapper | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application Quality control and performance evaluation of natural fibers such as cotton an... |
 |
Coating abrasion resistance meter | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards： ASTM D4060. GB/T 23988-2009. etc. Main performance features: The platform can... |
 |
Automatic voltage internal resistance tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Automatic Voltage & Internal Resistance Tester is a precision electrical testing in... |
 |
Respirator Fit Test meter | Whats/App: +86 156 1874 6768 Web: standard-groups.com PortaCount Respirator Fit Tester: Qinsun assesses the overall integrity of masks by perfor... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
