Split-Body Counterweight Dummy - Hollow
Split-Body Counterweight Dummies are widely used by automotive manufacturers both domestically and internationally.
Standards
Toyota, Honda, Nissan; Mercedes-Benz, BMW, Volkswagen; General Motors, Ford; Hyundai, Kia; as well as automakers from India, Pakistan, Europe, South Africa, the Middle East, and domestic Chinese manufacturers including SAIC, FAW, BAIC, Volkswagen, King Long, Yutong, JAC, Geely, BYD, Haima, and others.
Features
Classified by external dimensions and capacity:
700×620×400mm (80L), 690×520×400mm (70L), 730×480×400mm (60L), 508×494×846mm (100L)
By payload capacity:
60kg, 65kg; 68kg, 70kg, 75kg; 80kg, 85kg, 90kg, 95kg; 100kg, 110kg
Parameters
1. 100kg Class Weight Dummy
| Item | Specification |
|---|---|
| External Dimensions | L508 × W494 × H846mm |
| Standard Volume | 100L |
| Material | High-strength PE |
| Left-Right Width | 494mm |
| Front-Rear Width | 508mm |
| Center of Gravity Height | 295mm |
| Base Height | 275mm |
| Total Height | 860mm |
| Water Inlet Diameter | 95mm |
| Application | Automobile, locomotive, high-speed rail, or space simulation |
| Ballast (Liquid) | Liquid (water), total weight 100–110kg after filling |
| Ballast (Solid) | Solid (sand/pebbles/glass beads/iron sand), total weight 150–220kg |
| Customization | Customizable color, shape, size, lifting straps, lifting rings, sensors, etc. |
2. 85kg Class Weight Dummy
| Item | Specification |
|---|---|
| External Dimensions | L620 × W400 × H620mm |
| Standard Volume | 80L ~ 90L |
| Material | High-strength PE |
| Left-Right Width | 400mm |
| Front-Rear Width | 620mm |
| Center of Gravity Height | 240mm |
| Base Height | 240mm |
| Total Height | 700mm |
| Water Inlet Diameter | 86mm |
| Application | Automobile, locomotive, high-speed rail, or space simulation |
| Ballast (Liquid) | Liquid (water), total weight 85–95kg after filling |
| Ballast (Solid) | Solid (sand/pebbles/glass beads/iron sand), total weight 120–160kg |
| Customization | Customizable color, shape, size, lifting straps, lifting rings, sensors, etc. |
3. 75kg Class Weight Dummy
| Item | Specification |
|---|---|
| External Dimensions | L520 × W400 × H690mm |
| Standard Volume | 70L |
| Material | High-strength PE |
| Left-Right Width | 400mm |
| Front-Rear Width | 520mm |
| Center of Gravity Height | 240mm |
| Base Height | 240mm |
| Total Height | 730mm |
| Water Inlet Diameter | 86mm |
| Application | Automobile, locomotive, high-speed rail, or space simulation |
| Ballast (Liquid) | Liquid (water), total weight 75kg after filling |
| Ballast (Solid) | Solid (sand/pebbles/glass beads/iron sand), total weight 140kg |
| Customization | Customizable color, shape, size, lifting straps, lifting rings, sensors, etc. |
4. 65kg Class Weight Dummy
| Item | Specification |
|---|---|
| External Dimensions | L480 × W400 × H600mm |
| Standard Volume | 60L |
| Material | High-strength PE |
| Left-Right Width | 400mm |
| Front-Rear Width | 480mm |
| Center of Gravity Height | 380mm |
| Base Height | 155mm |
| Total Height | 730mm |
| Water Inlet Diameter | 86mm |
| Application | Automobile, locomotive, high-speed rail, or space simulation |
| Ballast (Liquid) | Liquid (water), total weight 65kg after filling |
| Ballast (Solid) | Solid (sand/pebbles/glass beads/iron sand), total weight 120kg |
| Customization | Customizable color, shape, size, lifting straps, lifting rings, sensors, etc. |
在线联系供应商
Other supplier products
 |
Micro-Scale Abrasion Tester | The STD-TE 66 Micro-Scale Abrasion Tester is used for determining the wear coefficient of hard and soft coatings and monolithic materials by abrasi... |
 |
Cantilever Fabric Stiffness Tester | Standard ZB WO4003. GB/T18318. ASTM D 1388. IS09073-7. BS EN22313 Application Fabric Stiffness Tester, is a practical equipment to determine the... |
 |
Tape abrasion tester | Thetape abrasion testmachine having a number of times to reach the stop function and having breaks down function, which can reduce product testing ... |
 |
Car seat fatigue tester | 1. Product Overview The Automotive Seat Frame Durability Tester is a precision testing system designed to evaluate the impact strength and energy ... |
 |
Shoe Lace and Eyelet Abrasion Tester | The Shoe Lace and Eyelet Abrasion Tester is designed to evaluate the wear resistance and durability of shoelaces and shoe eyelets under repeated fr... |
