Filter Media Test System，ISO 5011 filter media performance tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Test System for multiple parameter testing at filter media, space-saving design by vertical-orientated flow channel. Performance of filter media is essentially defined by parameters such as differential pressure, gravimetric filtration efficiency and dust holding capacity.
This test bench has been designed as universal testing equipment. It combines a simple and robust setup with a manual and therefore cost efficient handling and operation. Because of its vertical test channel setup it is especially suitable for the testing of filter media according to ISO 5011.
Applications
Quality assurance of flat sheet filter media in terms of a final clearance and a receiving inspection
performance testing of filter materials during research and development stage.
Standards
GB/T 6165 — High Efficiency Air Filters — Performance Test Methods
GB 2626 — Respiratory Protection — Non-powered Air-Purifying Particle Respirators
EN 13274-7 — Respiratory Protective Devices — Test Methods — Part 7: Determination of Particle Filter Penetration
ISO 5011 — Inlet Air Cleaning Equipment for Internal Combustion Engines and Compressors — Performance Testing
ISO 29463-3 — High-Efficiency Filters and Filter Media for Removing Particulate Matter in Air — Part 3: Testing Flat Sheet Filter Media
ISO 29463-5 — High-Efficiency Filters and Filter Media for Removing Particulate Matter in Air — Part 5: Test Method for Filter Elements
Technical data
| Parameter | Unit | Value |
|---|---|---|
| Test flow rate | m³/h | 1.5-18 |
| Measuring range, differential pressure | Pa | 5000 |
| Compressed air supply (operating gas/air) | bar | 6 |
| Power supply | – | 110 … 230 VAC, 50/60 Hz |
| Operating medium (aerosol) | – | DEHS, ISO 12103-1 A2 |
Features
Reliable timesaving testing of gravimetric filter efficiency, dust holding capacity, differential pressure and fractional filtration efficiencyholders for test filter and backup filter separately removable, weighable without filter removal
Backup filter for protection of the flow rate unit in case of a filter breakthrough
Integrated Solid Aerosol Generator SAG 410 for feeding rates from approx. 1.5 - 20 g/h
Principle
- Flow rate unit: injector pump with a set of critical nozzles to adjust different flow rates
- Intake test air is directed through a special intake section for homogenous mixing with the test aerosol
- Test filter holding manually operable
- Solid aerosol generator exchangeable by different models of the series
- Control of the Solid Aerosol Generator integrated to the test rig
- Test dust dispersion by using an injector nozzle
- Suitable especially for test dusts ISO 12103-2 A2/A4
Accessories
Differential pressure measurement
Fractional efficiency measurement:
- Aerosol Spectrometer
- Aerosol Dilution System
- Sample Switching, controllable by means of software of aerosol spectrometer or via serial interface
Test Procedures
The flow rate is adjusted by a flow rate unit consisting of an injector pump with a set of critical nozzles;
The intake test air is guided through a dedicated intake section to ensure homogeneous mixing with the test aerosol;
The test filter is mounted in a manually operable filter holder;
The solid aerosol generator can be exchanged with other models of the same series and is fully integrated into the test rig control;
Test dust is dispersed into the airflow using an injector nozzle, making the system particularly suitable for ISO 12103-2 A2/A4 test dusts;
Under defined test conditions, filtration efficiency, differential pressure, and dust holding capacity are measured and recorded.
Maintenance Information
(1) Regularly inspect and calibrate the flow rate unit and differential pressure measurement devices
(2) Keep the aerosol generator and injector nozzles clean to prevent dust blockage
(3) Ensure the compressed air quality meets system requirements
(4) Clean the test channel and filter holders after each test
(5) Store the system in a clean and dry environment during long-term shutdown
在线联系供应商
Other supplier products
 |
Precision Drawer Slide Durability Test Equipment IEC Standard | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) ANSI/BIFMA X5.5 – Desk Products: Tests for Drawer Durabi... |
 |
Bend strength catheter testing apparatus | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The instrument is designed to comply with the following standards: (1) YY/T 032... |
 |
Vertical low temperature cold resistance tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product description: This machine is used to test finished shoes, rubber, plastic, soles, ... |
 |
Textile surface burning tester丨Textile surface burning test machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Textile surface burning testeris designed by adopting the latest technology, suitable for... |
 |
Blow-By Test Rig，ISO 8178 internal combustion engine blow-by test system | Whats/App: +86 156 1874 6768 Web: standard-groups.com Test system for the characterisation of the oil content in blow-by gases at engine test sys... |
Same products
 |
ER4047 Aluminum Mig Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing reliable welding material... |
 |
ER4043 Silicon Aluminum Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing high-quality welding mate... |
 |
Choosing the Right Equipment for Heavy-Duty Cleaning | 卖方: Taizhou Feike Mechanical Technology Co., Ltd. | FEIKE’s High Pressure Washer is designed for industrial cleaning, equipment maintenance, ve... |
 |
ER4043 Silicon Aluminum Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
