Hydraulic Oil Precision Filter Tester，ISO 4406 hydraulic fluid precision filtration device
The Hydraulic Oil Precision Filter Tester is a specialized filtration device for processing high-precision industrial oils such as hydraulic oil, anti-wear hydraulic oil, and heat transfer oil. It belongs to the category of oil purification and regeneration equipment and is widely used in industries such as petroleum, chemical, metallurgy, power, and machinery manufacturing. This equipment effectively removes impurities, moisture, gas, and metal particles from the oil through purely physical methods, thereby restoring the oil's performance and extending the service life of hydraulic systems and related equipment.
Applications
Filtration of hydraulic lubrication system during refueling.
● Bypass filtration of hydraulic lubrication system during operation.
● Circulation filtration of hydraulic lubrication system before operation.
● Hydraulic lubrication system oil is not filtered and pumped out by the pump of the equipment itself.
(Note: This machine is not applicable to flammable and explosive media such as fuel oil.)
Standards
NAS 1638 : Cleanliness Requirements for Hydraulic Fluids
ISO 4406: 2021 Hydraulic fluid power — Fluids — Method for coding the level of contamination by solid particles
GJB 420A-2006 : Classification of Solid Particle Contamination in Hydraulic Systems and Components
GB/T 14039-2002 – Hydraulic Transmission: Oil contamination control and monitoring
GB/T 18854-2015 – Hydraulic Transmission: Determination of solid particle contamination levels
Features
1. Employs strong magnetic filter material for efficient adsorption and removal of metallic impurities such as iron filings;
2. Equipped with original imported polymer materials for thorough demulsification;
3. Combines coalescence separation technology with vacuum duplex three-dimensional flash evaporation process to significantly improve dehydration and degassing efficiency and thoroughness;
4. Utilizes internationally advanced multi-U-shaped gradually denser carbon fiber far-infrared heaters for uniform heating, high efficiency, and energy saving;
5. The entire filtration process is purely physical, without damaging the original properties of the oil or various additives; Strong wind cooling technology accelerates water vapor condensation and sedimentation, effectively protecting the stable operation of the vacuum pump.
Technical Parameters
| Technical Parameters | Specifications |
|---|---|
| Working Pressure | 0.6MPa |
| Differential Pressure for Alarm | 0.2MPa |
| Flow Rate | 50±5L/min |
| Medium | ≤160mm/s (20℃) |
| Accuracy | 5μm |
| Rated Power | 2.2KW |
| Power Supply Voltage | 3-phase 380V |
| Frequency | 50Hz |
| Operating temperature | 20℃ - 70℃ |
Accessoriess
1. Core Functional Components:
Dedicated gear pump (low noise, self-priming)
Multi-stage filtration system (including coarse filter and replaceable fine filter cartridges of different precision)
High-pressure pipeline and overflow protection device
Pressure gauge and differential pressure transmitter (for real-time monitoring of system pressure and filter cartridge contamination level)
2. Electrical and Control Components:
Control panel (including buttons and display screen)
Three-phase 380V power adapter
2.2KW rated power drive motor
3. Consumable Components:
Filter cartridges of different precision (matching 5μm and other precision requirements)
Seals (such as O-rings, pipeline gaskets, for leak prevention)
Sampling-related components (such as sampling bottles, pipeline connectors; some equipment comes with high-cleanliness sampling tools)
4. Auxiliary Components:
Casts (easy-to-move parts on the bottom of the equipment)
Instruction manual, certificate of conformity, and other documentation
Test Procedures
When the oil filter works for a period of time, the oil filter oil system pressure increases accordingly, the performance of its components have different effects, especially on the filter precision of the filter element of the shadow
core damage, the main reason for this is that the filter element of the differential pressure rises, the need to replace the filter element. Specific cleaning and replacement methods are as follows:
Cleaning: (only on the pump before the suction oil filter)
Cleaning cycle: oil filter continuous work for a week (about 150 hours)
a. Unscrew the top cover of the oil suction filter and take out the filter element.
b.Cleaning the filter element:When cleaning the filter element, soak it with gasoline for about half an hour and then remove the impurities with a brush.
Replacement
Conditions for replacement: When the oil filter is filtering, when the red indicator pops up on the differential pressure alarm installed on the pre-filter and fine filter, the cartridge needs to be
Replacement method: loosen the four bolts on the upper cover of the pre-filter and fine filter, remove the upper cover, take out and replace the filter element.
Precautions
The oil filter can not filter gasoline and other flammable liquids.
If the oil pool (or tank) of the oil is too dirty and there may be large obstacles, in the suction port should be installed on the large mesh filter protection.
The oil suction and discharge pipes should be kept clean.
在线联系供应商
Other supplier products
 |
Particle Strength Tester | The Particle Strength Tester is a high-precision instrument designed to measure the mechanical strength of individual particles, granules, and cata... |
 |
Sliding bearing PV friction testing machine | Standard This machine is mainly applicable to GB 7948-1987 plastic bearing limit PV test method, JB/T 7381-2010 powder metallurgy oil bearing PV v... |
 |
Cut Susceptibility Tester | The Cut Susceptibility Tester is designed to evaluate the resistance of photovoltaic module backsheets and surface materials to cutting, scratchi... |
 |
Material Surface Performance Comprehensive Tester | The Material Surface Performance Comprehensive Tester is a modular instrument designed for high-precision evaluation of material and component surf... |
 |
Safety Helmet Impact Acceleration Tester | The safety helmet impact acceleration tester is an instrument used to test the performance of safety helmets when subjected to impact. It can simul... |
Same products
 |
Common Rail Injector Valve Set F00RJ00339 | 卖方: Pioneer Diesel Parts | Pioneer Diesel Parts Whats/App: +86 152 6025 8100 Web: pioneerdieselparts.com The Common Rail ... |
 |
Fuel Injection Pump for Yanmar Wb93r Wb97r Wb97s Wb98a | 卖方: Pioneer Diesel Parts | Pioneer Diesel Parts Whats/App: +86 152 6025 8100 Web: pioneerdieselparts.com The Fuel Injecti... |
 |
VE Injection Pump VE3/9F1500L376AG | 卖方: Pioneer Diesel Parts | Pioneer Diesel Parts Whats/App: +86 152 6025 8100 Web: pioneerdieselparts.com The VE Injection... |
 |
Automotive seat durability and strength testing machine | 卖方: Standard International Group (HK) Limited | The Automotive Seat Three-Station Headrest and Backrest Static Strength Testing Machine is design... |
 |
Racing Seatback Headrest Restraint Device, Front and Rear Impact Testing Machine | 卖方: Standard International Group (HK) Limited | The Racing Seat Headrest Restraint and Front-Rear Impact Testing Machine is designed to evaluate ... |
