Rapid Thermal Conductivity Tester for Geotechnical Materials (Transient Plane Heat Source Method) ISO 22007
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Rapid Thermal Conductivity Tester for Geotechnical Materials (Transient Plane Heat Source Method) is a high-precision instrument based on the TPS (Transient Plane Source) technique, utilizing a Hot Disk probe. This tester measures thermal conductivity of geotechnical materials, including soils, rocks, and other solid specimens.
The Hot Disk method offers several advantages:
Direct measurement of heat propagation, saving significant testing time.
Avoids errors caused by contact thermal resistance, unlike steady-state methods.
Minimal sample preparation; solid samples only require a relatively flat surface.
The tester provides rapid, accurate measurements, with broad applicability and the ability to reduce the influence of natural convection during testing. The instrument includes a special circular sample holder for geotechnical specimens.
Reference standard: ISO 22007-2:2008.
Application
This testeris designed for thermal characterization of geotechnical materials, including:
Soils, clays, and sands
Rocks and rock aggregates
Cemented and compacted geotechnical specimens
Building foundation materials and insulation layers
Typical applications include:
Geotechnical research and engineering labs
Civil engineering thermal property evaluation
Environmental and geoscience studies requiring thermal conductivity data
Rapid testing of core samples or cylindrical specimens
Standards
ISO 22007-2:2008 – Determination of Thermal Conductivity and Thermal Diffusivity of Solids by Transient Plane Source (TPS) Technique
Parameters
| Item | Specification |
|---|---|
| Thermal conductivity range | 0.001–100 W/(m·K) |
| Measurement time | 1–60 seconds |
| Accuracy | Better than 3% |
| Temperature range | Standard: room temperature; optional: -20–120°C (additional cost) |
| Sample dimensions | Height ≥10 mm; diameter ≥45 mm; relatively flat surface required |
| Sample type | Solid geotechnical specimens, soil cores, rock slices |
| Operation | Fully automated via software |
| Power supply | AC 220V, 50/60 Hz; total power |
| Reference standard | ISO 22007-2:2008 |
Features
Rapid testing: Complete measurement in 1–60 seconds.
Minimal sample preparation: Solid specimens only need a flat surface.
Avoids contact resistance errors: Ensures accurate results for geotechnical materials.
Automated operation: Software-controlled measurement, data analysis, and report output.
Special sample holder: Circular holder designed for soil and rock specimens.
Broad applicability: Can test a wide range of geotechnical samples under varying temperature conditions.
Accessories
Main instrument
Analysis software (Chinese & English version)
Hot Disk probe
Geotechnical circular sample holder
Power cable and basic user manual
Test Procedures
Prepare two geotechnical sample blocks with relatively flat surfaces.
Place the Hot Disk probe between the two sample blocks, ensuring full contact.
Set the test parameters in the software, including sample type and temperature range.
Start the test; the software automatically collects temperature data and calculates thermal conductivity.
Review the results and generate a report.
Maintenance Information
Keep the Hot Disk probe clean and free from debris.
Regularly inspect the circular sample holder for wear or damage.
Calibrate the instrument periodically using reference materials.
Maintain a stable laboratory temperature to reduce measurement variability.
Store the device in a dry environment to protect electronics and thermal components.
在线联系供应商
Other supplier products
 |
Automated conduit bending tester for PV modules | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Photovoltaic Module Wire Tube Bending Testing Machine is designed to evaluate the mecha... |
 |
Tribology probe wear scar tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application Measurement of wear scars and assessment of abrasion resistance for metals, ce... |
 |
aatcc scorch & sublimation tester丨aatcc scorch & sublimation chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com Brief Introduction Scorch/Sublimation Tester is used in the laboratory to evaluate colour ... |
 |
Large Cone Calorimeter with Variable Atmosphere，Cone calorimeter for fire safety testing | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Large Cone Calorimeter with Variable Atmosphere is designed to measure the heat release... |
 |
UL 224 Heat Shrink Tubing Flammability Test Equipment Supplier | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com E-mail：info@standard-groups。com Features The electrical conduit flame retar... |
Same products
 |
不锈钢焊剂芯焊丝 E308T1-1 E308HT1-1 E308LT1-1 用于304不锈钢焊接的气保焊丝 | 卖方: 863048 | 产品描述 不锈钢药芯焊丝 E308T1-1 E308HT1-1 E308LT1-1，FCAW不锈钢焊丝，AWS A5.22药芯焊丝，304不锈钢焊接耗材，低碳不锈钢药芯焊丝，耐高温不锈钢焊丝，... |
 |
E317LT1-1 焊剂芯线 CO2 不锈钢焊剂含量70% 直径1.0/1.2/1.6mm OEM定制 1200℃熔点 | 卖方: 863048 | 迅卓不锈钢药心焊丝 E317LT1-1 分类： Сварочная проволока E317LT1-1 с флюсом, нержавеющая сталь, 70% содержан... |
 |
Mini Jewelry Laser Repair System – 60W to 400W Precision Welding | 卖方: Beijing JCZ Technology Co., Ltd | The Mini Jewelry Laser Welding Machineis an advanced mini laser welding system engineered for pre... |
 |
Portable Backpack Laser Cleaning Machine – Lightweight, Efficient Rust & Paint Removal | 卖方: Beijing JCZ Technology Co., Ltd | TheHCP-M SeriesBackpack Laser Cleaning Machinefeatures a compact pulsed fiber laser system, desig... |
 |
Suitcase Pulsed Laser Cleaning Machine | Ultra-Portable Handheld Fiber Laser Cleaner | 卖方: Beijing JCZ Technology Co., Ltd | The Suitcase Pulsed Laser Cleaning Machineis an ultra-portable, high-precision handheld fiber las... |
