Vacuum Tribometer
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Vacuum Friction and Wear Tester is a specialized tribological testing system designed to study friction, wear, and related surface interactions under vacuum conditions. By precisely controlling normal load, sliding speed, and temperature, the system enables detailed analysis of material behavior in high vacuum or inert gas environments. Its unique mechanical design and high-precision force sensors ensure excellent data accuracy and repeatability. Multiple tests—including friction, wear, lubrication, scratch, and hardness—can be performed on a single platform, making it suitable for advanced vacuum tribology research and material evaluation under extreme conditions.
Application
The Vacuum Friction and Wear Tester is used for investigating tribological behavior under controlled vacuum or inert gas environments, including:
Friction and wear evaluation of materials under high vacuum, high-temperature, and low-temperature conditions
Study of surface friction, wear, and adhesion mechanisms unique to vacuum environments
Tribological testing of coatings, bulk materials, and surface-modified components
Vacuum lubrication performance evaluation for materials and lubricated surfaces
Scratch, indentation, and hardness testing under vacuum conditions
Typical test configurations include rotational friction, linear reciprocating friction and wear, indentation, and scratch testing, all conducted on the same testing platform.
Standards
The tester is designed to support test methods referenced in the following standards:
ASTM G99 (Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus)
ISO 20808 (Fine ceramics — Determination of friction and wear characteristics of monolithic ceramics by ball-on-disk method)
GB/T 3142 (Determination of load-carrying capacity of lubricants — Four-ball method)
SH/T 0189 (Test method for anti-wear properties of lubricating oils — Four-ball method)
ASTM D3702-24 (Standard Test Method for Wear Rate and Coefficient of Friction of Materials in Self-Lubricated Contact)
ISO 1461:2022 (Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods)
Parameters
| Item | Description |
|---|---|
| Vacuum Level | Down to 10⁻⁷ Torr |
| Load Range | mN to 200 N |
| Temperature Range | −150 °C to 800 °C |
| Test Modules | Interchangeable friction, wear, hardness, and scratch modules |
| Test Modes | Rotational friction, linear reciprocating friction and wear, indentation, scratch |
| Environmental Control | High vacuum or inert gas atmosphere |
Features
Low-drift mechanical force sensors designed for sealed vacuum environments
Rapid vacuum generation, achieving 10⁻⁷ Torr within approximately 45 minutes using integrated vacuum and molecular pumps
High-precision temperature control, with low-temperature capability down to −150 °C and high-temperature operation up to 400 °C (optional up to 1000 °C)
Rotational and reciprocating test modules combined with a high-precision XY platform for automatic test radius adjustment
Closed-loop loading control enabling real-time force regulation and automatic generation of friction force versus load or speed curves
Support for additional modules including scratch, indentation, and friction testing
在线联系供应商
Other supplier products
 |
Bending Test device | Whats/App: +86 156 1874 6768 Web: standard-groups.com Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength ... |
 |
Thermal and Combustion Testing Equipment for Aircraft Liners | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The system supports testing in accordance with the following international aeros... |
 |
Xenon Arc Weatherometer | IntroductionThe xenon arc lamp, which is capable of simulating the whole natural sunlight spectrum in the most consistent manner, can reproduce the... |
 |
Automotive Seat Three-Station Headrest and Backrest Static Strength Testing Machine，Vehicle seat static load testing rig | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Automotive Seat Three-Station Headrest and Backrest Static Strength Testing Machine is ... |
 |
Coatings Shear tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard YY/T 0856-2011 (China): Specifies mechanical testing protocols for metal angular ... |
Same products
 |
Mini Jewelry Laser Welding Machine | 卖方: Beijing JCZ Technology Co., Ltd | The Mini Jewelry Laser Welding Machineis an advanced mini laser welding system engineered for pre... |
 |
Pulse Laser Cleaner | Handheld Solution for Precision Surface Cleaning for Rust & Coating | 卖方: Beijing JCZ Technology Co., Ltd | Looking for an efficient and eco-friendly laser cleaning machine? The HCP Series Pulse Laser Clea... |
 |
Mini Type Laser Marking & Engraving Machine – Fiber & UV Laser Options for Precise Marking | 卖方: Beijing JCZ Technology Co., Ltd | This compact, Mini Type fiber laser marking machineis perfectly suited for small businesses, work... |
 |
Large Enclosed Laser Marking & Engraving Machine for Industrial Use | 卖方: Beijing JCZ Technology Co., Ltd | The Large Closed Laser Marking Machineis a high-performance engraving solution designed for indus... |
 |
Axial force wire guide apparatus | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards YYT0807 - 2010 :Standard Guide... |
