Seat Thermal Manikin
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Application
Automotive seat thermal comfort and humidity management testing
Truck seat heat performance evaluation
Office chair long-term comfort and heat dissipation testing
Aircraft seat thermal comfort and cooling/ventilation performance assessment
Heated seat performance testing
Seat material thermal conductivity verification
Automotive seat design and ergonomic research
Passenger environment thermal comfort optimization and HVAC system evaluation
Standards
GB/T 18830-2009: Test methods for automotive seat and backrest thermal comfort
SAE J826: Human engineering H-point measurement standard
ISO 14505-2: Seat thermal comfort testing — Thermal manikin method
ISO 12894: Anthropometry and application of human models
ISO 9920: Clothing, personal protective equipment, and seat thermal comfort assessment
ASTM F1291: Standard method for evaluating thermal comfort using thermal manikins
ASTM F2370: Measurement of seat heat/cooling energy and humidity transfer
EN 12127: Automotive seat heat flux and pressure distribution measurement
Note: Some standards apply to overall seat thermal comfort evaluation, while others relate specifically to heat flux, humidity, or heated/ventilated seat energy transfer.
Product Specifications
| Category | Parameter | Technical Specification |
|---|---|---|
| Manikin Type | 50th percentile adult male, Back + Buttocks/Thighs | Based on SAE J826 HPM-II |
| Thermal Zones | 8 independently controlled zones | Each zone with temperature control protection |
| Shell Material | Heat-conductive carbon fiber | Embedded heating wires and sensors |
| Temperature Control Range | 10–40°C | ±0.1°C accuracy |
| Max Power Output | — | 1500 W/m² |
| Sweat Output Range | — | 0–1000 ml/hr/m² |
| Continuous Heat Dissipation | — | 350 W/m² |
| Power Accuracy | — | ±1% |
| Humidity Measurement Accuracy | — | ±3% RH |
| Power Supply | — | 208–265 VAC, 50/60Hz, Single Phase |
| Cooling Water | — | Temp-controlled chiller, 30°C, 500 W, 2 L/min, 15 PSI |
| Weight | — | Approx. 120 kg (without water cooling system) |
| Dimensions | — | 1189 × 575 × 856 mm |
Features
Eight independent thermal zones with protected temperature control for precise heat distribution
Active cooling simulating human blood flow prevents local overheating during heated seat tests
Dynamic Heat Flow Sensors (DHS) measure instantaneous energy exchange between seat and skin
Computer-controlled liquid delivery system distributes sweat per zone
Highly stable resistive heating ensures uniform heat flux
Software-controlled real-time monitoring, automatic testing, and flexible data recording
Pre-set thermal differential tests allow quick evaluation
Comprehensive evaluation for passive, heated, and ventilated seats
High-accuracy measurement of humidity and heat flux suitable for R&D and quality control
在线联系供应商
Other supplier products
 |
Thrust Washer Friction Testing Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com The thrust washer friction testing machine is mainly used to simulate the frictional cont... |
 |
Wire Torsion and Winding Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction Metal wire twisting and winding machine is widely used in aerospace, ... |
 |
Automotive Seat Structural Durability Test Bench | Cyclic Load Frame Strength Testing Equipment | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Features (1) Simulates vehicle collision and rapid deceleration conditions w... |
 |
ASTM D2843 smoke density tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application You can use the F313 Plastic Smoke Density Tester in the following areas: Pla... |
 |
Battery Isothermal Calorimeter | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Description Battery Isothermal Calorimeter is a professional instrument developed ... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
