Diesel Water Ash Sulfur Mixing Tester
Get a quote：
Whats/App: +86 185 0176 3615
Web: qinsun-lab.com
Analysis of water, ash, and sulfur content in diesel fuel is critical for quality control, compliance with specifications, and predicting fuel performance and emissions. Standard test methods for these parameters often require a homogeneous sample to ensure the measured value is representative of the entire batch. Free water can separate, and solid particulates (which contribute to ash and can contain sulfur) can settle.
While there isn't a single, universally recognized instrument explicitly named a "Diesel Water Ash Sulfur Mixing Tester," such a device would serve the function of vigorously and effectively mixing diesel samples under controlled conditions to disperse any settled water or solid contaminants. This prepared, homogeneous sample can then be accurately sampled for analysis using instruments like Karl Fischer titrators (water), furnaces (ash), and XRF or combustion analyzers (sulfur). The specific mixing method might vary, including mechanical stirring, shaking, or homogenization, potentially with temperature control to ensure the sample is in the correct state for mixing and subsequent analysis.
Applications
1. In diesel quality control, homogenization of samples provides representative, homogeneous samples for the analysis of water, ash, and sulfur content;
2. Meets the requirements for diesel sample pretreatment in standards such as ISO 16332. ISO 4406. and GB 19147;
3. Improves the accuracy and repeatability of analytical results by using equipment such as Karl Fischer titrators (for water content determination), combustion analyzers (for ash content determination), and X-ray fluorescence spectrometers (for sulfur content determination);
4. Standardized pretreatment of diesel samples in a laboratory environment assists in fuel quality compliance testing.
Standards
ISO 16332:2018：Diesel engines — Fuel filters — Method for evaluating fuel/water separation efficiency
ISO 4406:2021：Hydraulic fluid power — Fluids — Method for coding the level of contamination by solid particles
GB 19147-2016：Automobile diesel fuels
Features
Based on the likely requirements for mixing diesel samples for water, ash, and sulfur analysis:
Robust stirring or mixing mechanism suitable for diesel fuel viscosity (e.g., powerful magnetic stirrer with strong magnetic coupling, overhead stirrer with appropriate impeller, or a laboratory shaker).
Sample vessel holders or platforms capable of securing sample containers of various sizes (e.g., bottles, beakers).
Variable speed control for the mixing mechanism to adjust the mixing intensity based on sample volume and viscosity.
Technical Parameters
| Technical Specifications | Details |
|---|---|
| Test Oil | GB19147 diesel or calibration oil |
| Pollution Level Adjustment Range | Grade 17-25 |
| Water Content Adjustment Range | 1500-20000 ppm |
| Sulfur Content Adjustment Range | 10-2000 ppm |
| Test Particle Size Range | 10μm-100μm |
| Test Water Content Range | 0.1μg-350 mg |
| Main Fuel Tank Capacity | 100+5L |
| Dust Filling Tank Capacity | 1±0.2L |
| Dust Filling Rate | 10 mg/min-5 g/min |
| Water Filling Tank Capacity | 1±0.2L |
| Water Filling Rate | 20-400 mL/min |
| Diesel Filling Tank | 10+2L |
| Diesel Filling Flow Rate | 0.5-4 L/min |
| Sulfur Filling Tank Capacity | 1±0.2L |
| Sulfur Filling Flow Rate | 0.005-1 L/min |
| Operating Temperature | 5-40℃ |
| On-Site Humidity | 10-90%RH |
| Power Supply | AC220V/50Hz |
| Air Supply | 7-9 bar |
| Equipment Power | 3 kW |
| Dimensions | 1500×800×1600 mm (L×W×H) |
| Weight | 600 kg |
在线联系供应商
Other supplier products
 |
Universal Finger Abrasion Tester | Applications Universal Finger Abrasion Tester can simulate virtually all wear processes involving products and fingers/skin, and realistically rep... |
 |
Spring torsion tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Spring Torsion Tester is designed to precisely measure torsional properties, i... |
 |
Spray Rating Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Email: serving@qinsun-lab。com Standards: ISO 4920. BS EN 24920. BS 3702. GB/T 47... |
 |
Xenon lamp aging test chamber | TheXenon lamp aging test chamberis a photoaging tester for large-capacity textile testing. With additional sample light frame, temperature sensor a... |
 |
Full-Body Garment Stress Tester | Full-Body Garment Stress Tester is used to evaluate the pressure exerted by various form-fitting garments or other wearable apparel on the human bo... |
Same products
 |
Tabletop Xenon Arc Weathering Tester (SunMaster) | 卖方: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Water-Cooled Xenon Lamp Weat... |
 |
Blow-By Test Rig | 卖方: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Test system for the characterisa... |
 |
Air filter System（ISO 16890/EN 779） | 卖方: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Filter test system for general a... |
 |
Oil Thread Leak Test System | 卖方: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Test System for oil thread leak ... |
 |
Manual HEPA/ULPA Filter Scanning Test System | 卖方: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Manual HEPA/ULPA Filter Scan... |
