Friction and Wear Test Machine
Get a quote：
Whats/App: +86 185 0176 3615
Web: qinsun-lab.com
The Friction and Wear Testing Machine is a precision instrument designed to measure the coefficient of friction, wear volume, and related mechanical properties of materials under controlled load and speed conditions. Driven by an AC servo motor with a gear-and-rack transmission system, the machine delivers stable and accurate motion control. The worktable supports both constant load and continuous loading modes, enabling reliable low-, medium-, and high-load testing to meet the analytical requirements of laboratory research and industrial development.
Application
Materials science research: Evaluation of friction and wear behavior of metals, alloys, ceramics, polymers, and composite materials
Surface treatment and coating assessment: Wear resistance testing of surface treatments and coatings, including powder coatings, sprayed layers, and heat-treated surfaces
Mechanical component performance evaluation: Tribological analysis of gears, bearings, sliding pairs, and contact components
Industrial quality control: Routine friction and wear testing during production to ensure compliance with performance requirements
Academic and research laboratories: Fundamental tribology research and educational testing
Typical test samples include:
Metallic and alloy specimens
Ceramic and coated surfaces
Polymer films, sheets, and molded parts
Composite materials
Mechanical contact components
Standards
GB/T 6040-2008 Test Method for Wear Resistance of Metal Surfaces
GB/T 17657-2022 Test Methods of Evaluating the Properties of Wood-Based Panels and Surface-Finished Panels (including abrasion and scratch tests)
ISO 20502 Fine Ceramics and Coatings — Scratch and Wear Testing
ASTM D3702 Test Method for Wear Rate of Materials Using a Rotating Drum Apparatus
ASTM D1894 Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting
JIS K 7317:2022 Plastics — Film and Sheeting — Determination of Coefficient of Friction
JIS L 0849 Testing Methods for Abrasion Resistance of Plastic Products
Parameters
| Parameter | Specification |
|---|---|
| Sliding speed | 5 mm/min – 6000 mm/min |
| Drive motor | AC servo motor |
| Drive mechanism | Rack and pinion |
| Sliding distance | 1 – 100 mm |
| Motion mode – single | Stops automatically after preset distance |
| Motion mode – reciprocating | Reciprocating motion at set distance (up to 9.999.999 cycles) |
| Measurement range | 0 – 1000 gf |
| Safety device | Overload protection |
| Operating environment | 0 – 50 °C, ≤85% RH, non-condensing |
| Power supply | AC 100 V, 50/60 Hz |
| Dimensions | W 475 × D 450 × H 475 mm (excluding protrusions) |
在线联系供应商
Other supplier products
 |
Carpet Dynamic Load Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Carpet Dynamic Load Tester is also known as a dynamic load machine. It provides in... |
 |
Aerosol Foams Flammability Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Product Introduction This product complies with "Recommendations on the Transport... |
 |
Hair Dryer Temperature Test System | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com You can apply the Hair Dryer Temperature Testing Device in the following testing s... |
 |
Flat-Panel Air-Cooled Xenon Lamp Weathering Test Chamber | ASTM ISO Testing Machine | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Flat-Panel Air-Cooled Xenon Lamp Weathering Test Chamber employs xenon arc lamps c... |
 |
Bottle Wall and Bottom Thickness Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The wall and bottom thickness tester for bottles is mainly used to measure the thi... |
Same products
 |
ER4043 Silicon Aluminum Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing high-quality welding mate... |
 |
Choosing the Right Equipment for Heavy-Duty Cleaning | 卖方: Taizhou Feike Mechanical Technology Co., Ltd. | FEIKE’s High Pressure Washer is designed for industrial cleaning, equipment maintenance, ve... |
 |
ER4043 Silicon Aluminum Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
